Menu

MS under ISC B

NOTE: To search for a specific Malaysian Standard, press Ctrl + F and type in the MS number or any key word from the title of the MS.

NO

MS NUMBER

TITLE OF MS

ICS NUMBER

NATURE OF MS

REFERENCED INTERNATIONAL STANDARD

COMMITTEE NAME

1

MS 11:1971

SPECIFICATION FOR ANTIMONY OXIDE FOR PAINTS

87.060.10

INDIGENOUS

BS 338:1967

PAINTS AND VARNISHES

2

MS 12:1971

SPECIFICATION FOR TITANIUM DIOXIDE FOR PAINTS

87.060.10

INDIGENOUS

 

PAINTS AND VARNISHES

3

MS 10:1971

SPECIFICATION FOR TRIMMED SIZES OF PAPERS AND BOARDS

35.260

INDIGENOUS

-

PULP, PAPER AND BOARD

4

MS 24:1971

SPECIFICATION FOR TOILET SOAP

71.100.70

INDIGENOUS

 

SOAPS AND DETERGENTS

5

MS 133: PART A4:1973

METHOD OF TEST FOR PAINTS : PART A4 : NOTES FOR GUIDANCE ON PAINT APPLICATION

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

6

MS 133: PART F4:1973

METHODS OF TEST FOR PAINTS : PART F4 : RESISTANCE TO CONTINUOUS SALT SPRAY

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

7

MS 133: PART G4:1973

METHODS OF TEST FOR PAINTS : PART G4 : RESISTANCE TO HOT FATS

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

8

MS 163:1973

SPECIFICATION FOR WATER PAINT/DISTEMPER, WASHABLE OIL BOUND

87.040

INDIGENOUS

BS 3900

PAINTS AND VARNISHES

9

MS 166:1973

SPECIFICATION FOR OXYGEN (TECHNICAL GRADE)

71.040.40

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

10

MS 168:1973

SPECIFICATION FOR NITROGEN

71.040.40

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

11

MS 169:1973

SPECIFICATION FOR CARBON DIOXIDE

71.100.40

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

12

MS 170:1973

SPECIFICATION FOR COMPRESSED HYDROGEN, ELECTROLYTIC

71.040.40

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

13

MS 173:1973

SPECIFICATION FOR COMPRESSED AIR (OIL FREE)

71.100

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

14

MS 215:1974

SPECIFICATION FOR SULPHURIC ACID (BATTERY GRADE)

71.060.30

INDIGENOUS

BSI 3031:1958, CGSB 15-GP-86, SAA C.60-1961

GENERAL PURPOSE CHEMICALS

15

MS 240:1974

SPECIFICATION FOR DALAPON SODIUM SALT, WATER SOLUBLE POWDER

65.100

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

16

MS 216:1974, AMD. 1:1985

SPECIFICATION FOR SULPHURIC ACID (TECHNICAL GRADE)

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

17

MS 186:1974, Including AMD. 1:1985

SPECIFICATION FOR CHLORATES FOR AGRICULTURAL WEED KILLERS

65.100.99

INDIGENOUS

AS N 24-1955

PESTICIDES AND GROWTH REGULANT

18

MS 270:1975

SPECIFICATION FOR PRIMING PAINT : RED-LEAD BASED FOR IRON AND STEEL

87.060

INDIGENOUS

BS 3900

PAINTS AND VARNISHES

19

MS 272:1975

SPECIFICATION FOR PRIMING PAINT : ZINC CHROMATE FOR METAL SURFACES

87.060

INDIGENOUS

BS 3900

PAINTS AND VARNISHES

20

MS 288:1975

SPECIFICATION FOR PAINT, DRY, CEMENTITIOUS (CEMENT PAINT)

87.060

INDIGENOUS

 

PAINTS AND VARNISHES

21

MS 313:1975

METHOD FOR RING CRUSH TEST OF PAPERBOARDS

85.060

INDIGENOUS

-

PULP, PAPER AND BOARD

22

MS 418:1976, AMD. 1:1985

SPECIFICATION FOR TECHNICAL WARFARIN AND RODENTICIDE PREPARATIONS

71.040.30

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

23

MS 419:1976

SPECIFICATION FOR WARFARIN CONCENTRATES

71.040.40

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

24

MS 420:1976

SPECIFICATION FOR THIRAM WATER-DISPERSIBLE POWDERS

71.040.40

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

25

MS 422:1976

SPECIFICATION FOR CAPTAN WATER-DISPERSIBLE POWDERS

71.040.40

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

26

MS 423:1976

SPECIFICATION FOR TECHNICAL CAPTAN FOR PESTICIDAL PREPARATIONS

71.100

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

27

MS 421:1976, Including AMD. 1:1985

SPECIFICATION FOR TECHNICAL THIRAM FOR PESTICIDAL PREPARATIONS

71.100

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

28

MS 508:1977

SPECIFICATION FOR SODIUM CHLORATE (TECHNICAL GRADE)

71.060.99

INDIGENOUS

BS 4122:1967

GENERAL PURPOSE CHEMICALS

29

MS 509:1977

SPECIFICATION FOR CALCIUM CARBIDE

71.060.99

INDIGENOUS

 

LIME & LIME PRODUCTS

30

MS 480:1977

CODE OF PRACTICE ON THE SAFETY LABELLING OF PESTICIDE PRODUCTS

65.100.01

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

31

MS 507:1977

METHODS OF TESTS FOR INDUSTRIAL GASES

71.100.20

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

32

MS 560:1978, AMD. 1:1985

SPECIFICATION FOR MARINE SPAR VARNISH (COPAL VARNISH)

71.100.50

INDIGENOUS

BS 245:1956

PAINTS AND VARNISHES

33

MS 646:1980

SPECIFICATION FOR INDUSTRIAL METHYLATED SPIRITS

71.080.60

INDIGENOUS

BS 3591:1963

GENERAL PURPOSE CHEMICALS

34

MS 653:1980

SPECIFICATION FOR FOLDERS AND FILES

55.040

INDIGENOUS

-

PULP, PAPER AND BOARD

35

MS 658:1980

SPECIFICATION FOR LEAD ARSENATE TECHNICAL FOR PESTICIDE PREPARATIONS

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

36

MS 659:1980

SPECIFICATION FOR FENITROTHION TECHNICAL FOR PESTICIDAL PREPARATIONS

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

37

MS 660:1980

SPECIFICATION FOR TRICHLOROFON TECHNICAL FOR PESTICIDAL PREPARATIONS

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

38

MS 665:1980 AMD. 1:1985

SPECIFICATION FOR FENITROTHION WATER DISPERSIBLE POWDERS

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

39

MS 666:1980 AMD. 1:1985

SPECIFICATION FOR TRICHLORFON WATER SOLUBLE POWDERS

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

40

MS 701:1981

SPECIFICATION FOR COMMERCIAL SAND

91.100.15

INDIGENOUS

 

CLAY & CLAY PRODUCTS

41

MS 756:1981

SPECIFICATION FOR CHINA CLAY

91.100.15

INDIGENOUS

 

CLAY & CLAY PRODUCTS

42

MS 752:1981

SPECIFICATION FOR SODIUM SILICATES

71.100.01

INDIGENOUS

SS 111:1974, BS 3984:1966, ASTM D537, AWWA B404-58

GENERAL PURPOSE CHEMICALS

43

MS 732:1981

PAPER, BOARD, PULP AND RELATED TERMS - VOCABULARY

01.040.85, 85.060

INDIGENOUS

-

PULP, PAPER AND BOARD

44

MS 730:1981

SPECIFICATION FOR ENDOSULFAN DISPERSIBLE POWDER

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

45

MS 731:1981

SPECIFICATION FOR ENDOSULFAN TECHNICAL FOR PESTICIDAL PREPARATION

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

46

MS 747:1981

SPECIFICATION FOR GAMMA-BHC EMULSIFIABLE CONCENTRATES

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

47

MS 748:1981

SPECIFICATION FOR ENDOSULFAN EMULSIFIABLE CONCENTRATES

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

48

MS 749:1981 (AMD. 1:1986)

SPECIFICATION FOR ENDOSULFAN DUSTS

65.100.01

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

49

MS 847:1983

SPECIFICATION FOR SILICA SAND FOR THE MANUFACTURE OF SODIUM SILICATE

91.100.15

INDIGENOUS

 

CLAY & CLAY PRODUCTS

50

MS 851:1983

SPECIFICATION FOR PHOSPHORIC ACID (FOOD GRADE)

67.220.20

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

51

MS 855:1983

SPECIFICATION FOR NEWSPRINT

35.260

INDIGENOUS

-

PULP, PAPER AND BOARD

52

MS 880: PART 2:1984

METHODS OF TEST FOR PHOSPHORIC ACID : PART 2 : DETERMINATION OF OXIDES OF NITROGEN CONTENT

71.060.30

INDIGENOUS

ISO 3709

GENERAL PURPOSE CHEMICALS

53

MS 291:1984

SPECIFICATION FOR PAINT, VARNISH AND LACQUER REMOVER, SOLVENT TYPE, NON-FLAMMABLE

87.040

INDIGENOUS

TT-R-251 D, BS 3761:1970, AS K147:1964

PAINTS AND VARNISHES

54

MS 903:1984

SPECIFICATION FOR LATEX EMULSION PAINT FOR INTERIOR USE

87.020, 87.040

INDIGENOUS

 

PAINTS AND VARNISHES

55

MS 905:1984

SPECIFICATION FOR WHITE SPIRIT FOR PAINTS AND OTHER PURPOSES

87.060.30

INDIGENOUS

BS 245:1976, ISO/DP 1250

PAINTS AND VARNISHES

56

MS 329:1976 (CONFIRMED:1984)

SPECIFICATION FOR GUMMED PAPER TAPES

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

57

MS 880: PART 1:1985

METHODS OF TEST FOR PHOSPHORIC ACID : PART 1 : DETERMINATION OF TOTAL PHOSPHORUS (V) OXIDE CONTENT

71.060.30

INDIGENOUS

ISO 3708-1976

GENERAL PURPOSE CHEMICALS

58

MS 880: PART 3:1985

METHODS OF TEST FOR PHOSPHORIC ACID : PART 3 : DETERMINATION OF IRON CONTENT

71.060.30

INDIGENOUS

ISO/R 849:1968

GENERAL PURPOSE CHEMICALS

59

MS 880: PART 4:1985

METHODS OF TEST FOR PHOSPHORIC ACID : PART 4 : DETERMINATION OF ARSENIC CONTENT

71.060.30

INDIGENOUS

ISO 3359-1975

GENERAL PURPOSE CHEMICALS

60

MS 880: PART 5:1985

METHODS OF TEST FOR PHOSPHORIC ACID : PART 5 : DETERMINATION OF SULPHATE CONTENT

71.060.30

INDIGENOUS

ISO 2997:1974

GENERAL PURPOSE CHEMICALS

61

MS 880: PART 6:1985

METHODS OF TEST FOR PHOSPHORIC ACID : PART 6 : DETERMINATION OF CHLORIDE CONTENT

71.060.30

INDIGENOUS

ISO 3708:1976

GENERAL PURPOSE CHEMICALS

62

MS 880: PART 7:1985

METHODS OF TEST FOR PHOSPHORIC ACID : PART 7 : DETERMINATION OF LEAD CONTENT: ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD

71.060.30

INDIGENOUS

ISO 6678:1981

GENERAL PURPOSE CHEMICALS

63

MS 1003:1986

SPECIFICATION FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE

71.080.15

INDIGENOUS

IS 3321:1973, BS 2942:1957, ASTM D2378:1979

GENERAL PURPOSE CHEMICALS

64

MS 1029: PART 1:1986

METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 1 : DETERMINATION OF FORMALDEHYDE CONTENT

71.080.15

INDIGENOUS

ISO 2227-1972

GENERAL PURPOSE CHEMICALS

65

MS 1029: PART 2:1986

METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE :PART 2 : DETERMINATION OF IRON CONTENT

71.080.15

INDIGENOUS

ISO 2226-1972

GENERAL PURPOSE CHEMICALS

66

MS 1029: PART 3:1986

METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 3 : DETERMINATION OF METHANOL CONTENT.

71.080.15

INDIGENOUS

ISO 2228-1972

GENERAL PURPOSE CHEMICALS

67

MS 133: PART F9:1986

METHODS OF TEST FOR PAINTS : PART F9 : WASHABILITY

87.040

INDIGENOUS

AS K41

PAINTS AND VARNISHES

68

MS 121:1986

SPECIFICATION FOR SCHOOL EXERCISE BOOKS (FIRST REVISION)

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

69

MS 17:1986

SPECIFICATION FOR FACIAL TISSUE PAPER (FIRST REVISION)

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

70

MS 283:1986

SPECIFICATION FOR CARBON PAPER FOR TYPEWRITERS (FIRST REVISION)

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

71

MS 1029: PART 4:1987

METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 4 : DETERMINATION OF ACIDITY.

71.080.15

INDIGENOUS

ISO 2225-1972

GENERAL PURPOSE CHEMICALS

72

MS 1029: PART 5:1987

METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 5 : DETERMINATION OF ASH

71.080.15

INDIGENOUS

ISO 2224-1972

GENERAL PURPOSE CHEMICALS

73

MS 1078:1987

METHODS OF TEST FOR BOILING POINT OF ENGINE COOLANTS/ANTIFREEZES

71.100.45

INDIGENOUS

ASTM D1120

GENERAL PURPOSE CHEMICALS

74

MS 880: PART 8:1987

METHODS OF TEST FOR PHOSPHORIC ACID : PART 8 : DETERMINATION OF COPPER CONTENT

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

75

MS 162:1987

SPECIFICATION FOR ALUMINIUM WOOD PRIMER (FIRST REVISION)

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

76

MS 1079:1987

METHOD OF TEST FOR DETERMINATION OF TOTAL ANIONIC DETERGENT BY HYAMINE TITRATION

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

77

MS 289:1987

SPECIFICATION FOR ALUMINIUM FINISHING PAINT (FIRST REVISION)

87.04

INDIGENOUS

-

PAINTS AND VARNISHES

78

MS 1081:1987

METHOD OF TEST FOR DETERMINATION OF CATIONIC ACTIVE MATTER IN DETERGENTS- BY DIRECT TWO PHASE TITRATION PROCEDURE

71.100.40

INDIGENOUS

ISO 2871:1973, ISO 2271:1972

SOAPS AND DETERGENTS

79

MS 1103:1988

METHOD OF DETERMINATION OF WATER USING KARL FISCHER REAGENT

13.060.50

INDIGENOUS

ASTM E203-75

GENERAL PURPOSE CHEMICALS

80

MS 1104:1988

SPECIFICATION FOR PAINTERS' AND DECORATORS' BRUSHES (NATURAL BRISTLES)

97.195

INDIGENOUS

SLS 562:1982, IS 487:1976

PAINTS AND VARNISHES

81

MS 1158:1989

SPECIFICATION FOR CRAYON

97.195

INDIGENOUS

-

SAFETY OF TOYS

82

MS 1160:1989

SPECIFICATION FOR SCHOOL CHALKS

35.260

INDIGENOUS

-

PULP, PAPER AND BOARD

83

MS 1131: PART 1:1989

METHODS OF TEST FOR DALAPON : PART 1 : DETERMINATION OF 2, 2-DICHLOPROPIONIC ACID CONTENT

65.100.10

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

84

MS 994:1990

SPECIFICATION FOR WATER FOR LEAD-ACID BATTERIES

29.220.20

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

85

MS 1190:1990

SPECIFICATION FOR CARBONLESS PAPER OR NO CARBON REQUIRED NCR) PAPER

35.260

INDIGENOUS

-

PULP, PAPER AND BOARD

86

MS 1189:1990

SPECIFICATION FOR LAUNDRY BAR SOAP

71.100.70

INDIGENOUS

 

SOAPS AND DETERGENTS

87

MS 120:1992

SPECIFICATION FOR ENVELOPES (FIRST REVISION)

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

88

MS 1287:1992

SPECIFICATION FOR EXERCISE BOOK PAPER

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

89

MS 1290:1992

SPECIFICATION FOR OFFSET PRINTING PAPER

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

90

MS 13:1993

SPECIFICATION FOR AMMONIUM SULPHATE, FERTILIZER GRADE (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

91

MS 1328:1993

SPECIFICATION FOR TRIPLE SUPERPHOSPHATE, FERTILIZER GRADE

65.080

INDIGENOUS

IS 1013:1972

FERTILIZERS

92

MS 1329:1993

SPECIFICATION FOR DIAMMONIUM PHOSPHATE; FERTILIZER GRADE

65.080

INDIGENOUS

IS 6448:1971

FERTILIZERS

93

MS 1330:1993

SPECIFICATION FOR AMMONIUM CHLORIDE, FERTILIZER GRADE

65.080

INDIGENOUS

SLS 621:1983

FERTILIZERS

94

MS 14: PART 1:1993

SPECIFICATION FOR UREA, FERTILIZER GRADE (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

95

MS 14: PART 2:1993

SPECIFICATION FOR UREA, FERTILIZER GRADE : PART 2 : PRILLED UREA (FIRST REVISION)

65.060.80

INDIGENOUS

 

FERTILIZERS

96

MS 15:1993

SPECIFICATION FOR POTASSIUM CHLORIDE, FERTILIZER GRADE (FIRST REVISION)

87.060.10

INDIGENOUS

 

FERTILIZERS

97

MS 16:1993

SPECIFICATION FOR POTASSIUM SULPHATE, FERTILIZER GRADE (FIRST REVISION)

87.060.10

INDIGENOUS

 

FERTILIZERS

98

MS 48:1993

SPECIFICATION FOR GROUND MAGNESIUM LIMESTONE, AGRICULTURAL GRADE (FIRST REVISION)

87.060.10

INDIGENOUS

 

FERTILIZERS

99

MS 50:1993

SPECIFICATION FOR CALCIUM AMMONIUM NITRATE FERTILIZER (FIRST REVISION)

87.060.10

INDIGENOUS

 

FERTILIZERS

100

MS 51:1993

SPECIFICATION FOR SINGLE SUPERPHOSPHATE (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

101

MS 52:1993

SPECIFICATION FOR AMMONIUM SULPHATE NITRATE FERTILIZER (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

102

MS 53:1993

SPECIFICATION FOR AMMONIUM NITRATE FERTILIZER (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

103

MS 1303: PART 1:1993

SPECIFICATION FOR THERMOPLASTIC ROAD MARKING MATERIALS : PART 1 : REQUIREMENTS

83.080.20

INDIGENOUS

BS 6088

PAINTS AND VARNISHES

104

MS 132:1993

SPECIFICATION FOR UNDERCOATING PAINT FOR USE UNDER GLOSS ENAMEL PAINT(FIRST REVISION)

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

105

MS 1327:1993

SPECIFICATION FOR ZINC PHOSPHATE PRIMER

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

106

MS 133: PART A5:1993

METHODS OF TEST FOR PAINTS AND VARNISHES : PART A5: LARGE SCALE BRUSHING TEST (FIRST REVISION)

87.040

INDIGENOUS

ISO/TR 3172

PAINTS AND VARNISHES

107

MS 1363:1994

SPECIFICATION FOR DISODIUM TETRABORATE PENTAHYDRATE FERTILIZER GRADE

65.080

INDIGENOUS

 

FERTILIZERS

108

MS 417: PART 3:1994

THE ANALYSIS OF FERTILIZERS : PART 3 : METHOD FOR THE DETERMINATION OF NITROGEN (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

109

MS 909:1994

SPECIFICATION FOR COMPOUND FERTILIZERS, PREMIUM GRADE (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

110

MS 1364:1994

METHOD FOR DETERMINATION OF BRIMFUL CAPACITY OF AEROSOL CANS

55.130

INDIGENOUS

 

HOUSEHOLD PESTICIDES

111

MS 133: PART A8:1994

METHODS OF TEST FOR PAINTS AND VARNISHES : PART A8 : DANGER CLASSIFICATION BY FLASH-POINT (CLOSED CUP METHOD) (FIRST REVISION)

87.040

INDIGENOUS

ISO 1516-1981(E) 

PAINTS AND VARNISHES

112

MS 417: PART 1:1994, AMD. 1:2001

THE ANALYSIS OF FERTILIZERS : PART 1 : METHOD OF SAMPLING AND SAMPLE PREPARATION (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

113

MS 417: PART 2:1994, Including AMD. 1:2001

THE ANALYSIS OF FERTILIZERS : PART 2 : METHOD FOR THE DETERMINATION OF MOISTURE CONTENT, PARTICLE SIZE AND ASH CONTENT (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

114

MS 417: PART 4:1994, Including AMD. 1:2001

THE ANALYSIS OF FERTILIZERS : PART 4 : METHOD FOR THE DETERMINATION OF PHOSPHORUS (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

115

MS 417: PART 5:1994, Including AMD. 1:2001

THE ANALYSIS OF FERTILIZERS : PART 5: METHOD FOR THE DETERMINATION OF POTASSIUM (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

116

MS 417: PART 6:1994, Including AMD. 1:2001

THE ANALYSIS OF FERTILIZERS : PART 6 : METHOD FOR THE DETERMINATION OF MAGNESIUM (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

117

MS 644:1995

SPECIFICATION FOR FERTILIZER MIXTURES

65.080

INDIGENOUS

 

FERTILIZERS

118

MS 401: PART 1:1995

SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 1 : TECHNICAL 2,4-D (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

119

MS 401: PART 2:1995

SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 2 : TECHNICAL 2,4-D SODIUM SALT MONOHYDRATE (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

120

MS 401: PART 3:1995

SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 3 : TECHNICAL 2,4-D ESTERS (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

121

MS 401: PART 4:1995

SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 4 : 2,4-D ESTER EMULSIFIABLE CONCENTRATES (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

122

MS 401: PART 5:1995

SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 5 : 2,4-D SALT AQUEOUS SOLUTION (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

123

MS 401: PART 6:1995

SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 6 : 2,4-D SODIUM SALT MONOHYDRATES WATER SOLUBLE POWDERS (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

124

MS 125:1995, Including AMD. 1:1997

SPECIFICATION FOR GLOSS ENAMEL PAINT (SECOND REVISION)

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

125

MS 49:1994, ERR. 1:1996

SPECIFICATION FOR COMPOUND FERTILIZER, ORDINARY GRADE (SECOND REVISION)

87.060.10

INDIGENOUS

 

FERTILIZERS

126

MS 428:1976 (CONFIRMED:1996)

CODE OF PRACTICE FOR SAFETY IN THE MANUFACTURE AND HANDLING OF PESTICIDES

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

127

MS ISO 9227:1996

CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:1990, IDT)

77.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9227:1990

ISC B

128

MS 133: PART C4:1973 (CONFIRMED:1997)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART C4 : FREEDOM FROM RESIDUAL TACK

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

129

MS 133: PART C7:1997

METHODS OF TEST FOR PAINT AND VERNISHES: PART C7 : DETERNIMATION OF DRYING TIME USING BK DRYING RECORDER (SURFACE DRY, TOUCHED DRY AND HARD DRY)

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

130

MS 133: PART D5:1997

METHODS OF TEST FOR PAINTS AND VARNISHES : PART D5 : MEASUREMENT OS SPECULAR GLOSS OF NON-METALLIC PAINT FILM AT 20, 60 AND 85 (FIRST REVISION)

87.040

INDIGENOUS

ISO 2813:1994

PAINTS AND VARNISHES

131

MS 417: PART 8:1997, Including AMD.1:2001

THE ANALYSIS OF FERTILIZERS : PART 8 : METHOD FOR THE DETERMINATION OF SECONDARY PROPERTIES (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

132

MS 133: PART B1:1998

METHODS OF TEST FOR PAINTS AND VARNISHES : PART B1: DETERMINATION OF WATER (FIRST REVISION)

33.100.01

INDIGENOUS

BS 3900:1985:Part B1, ISO 760:1978(E) 

PAINTS AND VARNISHES

133

MS 1431:1998

PAINTS AND VARNISHES: PREPARATION OF ACID EXTRACTS FROM PAINTS IN LIQUID OR POWDER FORM

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6713:1984

PAINTS AND VARNISHES

134

MS 273:1998

SPECIFICATION FOR PARAQUAT DICHLORIDE AQUEOUS SOLUTIONS (FIRST REVISION)

65.100.99

INDIGENOUS

 

PESTICIDES AND GROWTH REGULANT

135

MS 1774: PART 4:1998

SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

EN 71-4:1990

SAFETY OF TOYS

136

MS 1774: PART 5:1998

SAFETY OF TOYS - PART 5: CHEMICAL TOYS (SETS) OTHER THAN EXPERIMENTAL SETS

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

EN 71-5:1993

SAFETY OF TOYS

137

MS 1774: PART 6:1998

SAFETY OF TOYS - PART 6: GRAPHICAL SYMBOL FOR AGE WARNING LABELLING

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

EN 71-6:1995

SAFETY OF TOYS

138

MS 133: PART D8:1999

METHODS OF TEST FOR PAINTS AND VARNISHES: PART D8: DETERMINATION OF HIDING POWER USING KUBELKA-MUNK METHOD FOR WHITE AND LIGHT COLOURED PAINTS

87.040

INDIGENOUS

ISO 6504/1:1983

PAINTS AND VARNISHES

139

MS ISO 1974:1999

PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD) (SECOND REVISION) (ISO 1974:1990, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1974:1990

PULP, PAPER AND BOARD

140

MS ISO 2144:1999

PAPER, BOARD AND PULPS - DETERMINATION OF RESIDUE (ASH) ON IGNITION AT 900°C (FIRST REVISION) (ISO 2144:1997, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2144:1997

PULP, PAPER AND BOARD

141

MS ISO 5626:1999

PAPER - DETERMINATION OF FOLDING ENDURANCE

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5626:1993

PULP, PAPER AND BOARD

142

MS ISO 6587:1999

PAPER, BOARD AND PULPS - DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACTS (ISO 6587 : 1992, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6587:1992

PULP, PAPER AND BOARD

143

MS ISO 8791-2:1999

PAPER AND BOARDS - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAKMETHODS) - PART 2: BENDTSEN METHOD (FIRST REVISION) (ISO 8791-2:1990, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8791-2:1990

PULP, PAPER AND BOARD

144

MS 647:1999

SPECIFICATION FOR SODIUM HYPOCHLORITE SOLUTIONS (FIRST REVISION)

71.060.20

INDIGENOUS

SABS 296-1960

SOAPS AND DETERGENTS

145

MS 1450:1999

SPECIFICATION FOR LIQUID FERRIC CHLORIDE FOR POTABLE WATER TREATMENT

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

146

MS 1451:1999

SPECIFICATION FOR LIQUID FERRIC CHLORO SULPHATE FOR POTABLE WATER TREAMENT

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

147

MS 1452:1999

SPECIFICATION FOR LIQUID FERRIC SULPHATE FOR POTABLE WATER TREAMENT

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

148

MS 1456:1999

GUIDELINES FOR THE APPLICATION OF LIQUID FERRIC BASED SALTS IN POTABLE WATER TREATMENT

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

149

MS 133: PART E1:2000

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E1 : BEND TEST (CYLINDRICAL MANDREL) (FIRST REVISION)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 1519:1973

PAINTS AND VARNISHES

150

MS 133: PART E12:2000

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E12 : INDENTATION TEST (SPHERICAL OR PYRAMIDAL)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6441:1984

PAINTS AND VARNISHES

151

MS 133: PART E2:2000

MOT FOR PAINTS AND VARNISHES : PART E2 : SCRATCH TEST (FIRST REVISION)

87.040.10

MODIFIED TO INTERNATIONAL STANDARD

ISO 1518:1992

PAINTS AND VARNISHES

152

MS 133: PART E7:2000

MOT FOR PAINTS AND VARNISHES : PART E7 : RESISTANCE TO IMPACT (FALLING BALL TEST)

87.040

INDIGENOUS

BS 3900: Part E7:1974

PAINTS AND VARNISHES

153

MS 417: PART 7:2001

THE ANALYSIS OF FERTILIZERS : PART 7 : METHOD FOR THE DETERMINATION OF BORON (SECOND REVISION)

65.080

INDIGENOUS

ISO 1916:1972

FERTILIZERS

154

MS 47:1972 (CONFIRMED:2001)

SPECIFICATION FOR BAT GUANO, FERTILIZER

65.080

INDIGENOUS

 

FERTILIZERS

155

MS 1116:2001

SPECIFICATION FOR SODIUM CHLORIDE FOR INDUSTRIAL USE (FIRST REVISION)

71.100

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

156

MS 175:1973 (CONFIRMED:2001)

SPECIFICATION FOR GLACIAL ACETIC ACID

71.080.40

INDIGENOUS

BS 576, JIS K 1351

GENERAL PURPOSE CHEMICALS

157

MS 176:1973 (CONFIRMED:2001)

SPECIFICATION FOR NITRIC ACID (TECHNICAL GRADE)

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

158

MS 178:1973 (CONFIRMED:2001)

SPECIFICATION FOR SULPHURIC ACID (AR GRADE)

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

159

MS ISO 2836:2001

GRAPHIC TECHNOLOGY-PRINTS AND PRINTING INKS-ASSESSMENT OF RESISTANCE TO VARIOUS AGENTS (ISO 2836 : 1999, IDT)

87.080

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2836 : 1999

GENERAL PURPOSE CHEMICALS

160

MS ISO 187:2001

PAPER, BOARD AND PULPS - STANDARD ATMOSPHERE FOR CONDITIONING AND TESTING AND PROCEDURE FOR MONITORING THE ATMOSPHERE AND CONDITIONING OF SAMPLES (ISO 187:1990, IDT)

85.040, 85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 187:1990

PULP, PAPER AND BOARD

161

MS ISO 535:2001

PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 535:1991

PULP, PAPER AND BOARD

162

MS ISO 536:2001

PAPER AND BOARD - DETERMINATION OF GRAMMAGE

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 536:1995

PULP, PAPER AND BOARD

163

MS ISO 7213:2001

PULPS - SAMPLING FOR TESTING

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 7213:1981

PULP, PAPER AND BOARD

164

MS 1518: PART 1:2001

SPECIFICATION FOR GLYPHOSATE : PART 1 : GLYPHOSATE (TECHNICAL)

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

165

MS 1518: PART 2:2001

SPECIFICATION FOR GLYPHOSATE : PART 2 : GLYPHOSATE SOLUBLE CONCENTRATES

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

166

MS ISO 8124-1:2001

SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (ISO 8124-1:2000, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-1:2000

SAFETY OF TOYS

167

MS 253:2001

SPECIFICATION FOR SCOURING POWDER (FIRST REVISION)

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

168

MS 167:1973 (CONFIRMED:2001)

SPECIFICATION FOR ACETYLENE, DISSOLVED (TECHNICAL GRADE)

71.040.40

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

169

MS 172:1973 (CONFIRMED:2001)

SPECIFICATION FOR NITROUS OXIDE

71.060.20

INDIGENOUS

-

GENERAL PURPOSE CHEMICALS

170

MS 133: PART E15:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E15 : DETERMINATION OF RESISTANCE TO ABRASION - ROTATING ABRASIVE RUBBER WHEEL METHOD

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 7784-2:1997

PAINTS AND VARNISHES

171

MS 133: PART E16:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E16 : DETERMINATION OF RESISTANCE TO ABRASION - RECIPROCATING TEST PANEL METHOD

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 7784-3:2000

PAINTS AND VARNISHES

172

MS 133: PART E17:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E17 : DETERMINATION OF MAR RESISTANCE USING A CURVED STYLUS

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 12137-1:1997

PAINTS AND VARNISHES

173

MS 133: PART E18:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E18 : DETERMINATION OF MAR RESISTANCE USING A POINTED STYLUS

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 12137-2:1997

PAINTS AND VARNISHES

174

MS 133: PART E19:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E19 : DETERMINATION OF FILM HARDNESS BY PENCIL TEST

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 15184:1998

PAINTS AND VARNISHES

175

MS 133: PART E8:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E8 : RESISTANCE TO IMPACT (PENDULUM TEST)

87.040

INDIGENOUS

BS 3900: Part E8:1974(1992)

PAINTS AND VARNISHES

176

MS 133: PART F2:2002

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F2 : RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION) (FIRST REVISION)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6270:1980

PAINTS AND VARNISHES

177

MS ISO 3688:2002

PULPS - PREPARATION OF LABORATORY SHEETS FOR THE MEASUREMENTS OF DIFFUSE BLUE REFLECTANCE FACTOR (ISO BRIGHTNESS) (ISO 3688:1999, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3688:1999

PULP, PAPER AND BOARD

178

MS ISO 692:2002

PULPS - DETERMINATION OF ALKALI SOLUBILITY (ISO 692:1982, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 692:1982

PULP, PAPER AND BOARD

179

MS ISO 699:2002

PULPS - DETERMINATION OF ALKALI RESISTANCE (ISO 699 : 1982, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 699: 1982

PULP, PAPER AND BOARD

180

MS 1551:2002

SPECIFICATION FOR SODA ASH (SODIUM CARBONATE) USED FOR PORTABLE WATER SUPPLY

71.100.80

INDIGENOUS

ISO 2460:1973

WATER TREATMENT CHEMICALS

181

MS 699:2002

ALUMINIUM SULPHATE USED FOR POTABLE WATER SUPPLY - SPECIFICATION (FIRST REVISION)

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

182

MS 333:1976 AMD. 1:1984

(CONFIRMED:2003)

SPECIFICATION FOR STENCIL PAPER (DUPLICATING-MACHINE, DRY-PROCESS)

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

183

MS ISO 6486-1:2003

CERAMIC WARE, GLASS-CERAMIC WARE AND GLASS DINNERWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 1 : TEST METHOD (ISO 6486-1:1999, MOD)

67.250, 81.040.30, 81.060.20, 97.040.60

MODIFIED TO INTERNATIONAL STANDARD

ISO 6486-1:1999

CLAY & CLAY PRODUCTS

184

MS ISO 6486-2:2003

CERAMIC WARE, GLASS-CERAMIC WARE AND GLASS DINNERWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 2 : PERMISSIBLE LIMITS (ISO 6486-2:1999, IDT)

67.250, 81.040.30, 81.060.20, 97.040.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6486-2:1999

CLAY & CLAY PRODUCTS

185

MS 643:2003

GLOSSARY OF TERMS USED IN THE FERTILIZER TRADE AND INDUSTRY (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

186

MS 1574:2003

SAMPLING AND PREPARING AQUEOUS SOLUTIONS OF ENGINE COOLANTS OR ANTIRUSTS FOR TESTING PURPOSES

71.080

INDIGENOUS

ASTM D1176-98

GENERAL PURPOSE CHEMICALS

187

MS 1706:2003

TEST METHOD FOR ASH CONTENT OF ENGINE COOLANTS AND ANTIRUSTS

71.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

188

MS 1707:2003

TEST METHOD FOR RELATIVE DENSITY OR RELATIVE DENSITY OF ENGINE COOLANT CONCENTRATES AND ENGINE COOLANTS BY THE HYDROMETER

71.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

189

MS 1708:2003

TEST METHOD FOR CORROSION TEST FOR ENGINE COOLANTS

71.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

190

MS 1709:2003

TERMINOLOGY FOR ENGINE COOLANTS

71.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

191

MS 430:1976 (CONFIRMED:2003)

SPECIFICATION FOR INK PASTE, BLACK (STENCIL, DUPLICATING-MACHINE)

87.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

192

MS 1569:2003

SPECIFICATION FOR PUTTY LIME

91.100

INDIGENOUS

AS 4489.4.1:1997

LIME & LIME PRODUCTS

193

MS 1570:2003

METHOD OF TEST FOR CHEMICAL ANALYSIS OF PUTTY LIME

91.100

INDIGENOUS

BS 6463: Part 2: 1984

LIME & LIME PRODUCTS

194

MS 133: PART C3:1996 (CONFIRMED:2003)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART C3: THROUGH-DRY TEST (FIRST REVISION)

87.040

INDIGENOUS

ISO 9117:1990

PAINTS AND VARNISHES

195

MS 133: PART F10:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F10 : DETERMINATION OF RESISTANCE TO CATHODIC DISBONDING OF COATINGS FOR USE IN MARINE ENVIRONMENTS

87.040

INDIGENOUS

BS 3900: Part F10:1985

PAINTS AND VARNISHES

196

MS 133: PART F11:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F11 : DETERMINATION OF RESISTANCE TO CATHODIC DISBONDING OF COATINGS FOR USE IN ON LAND-BASED BURIED STRUCTURES

87.040

INDIGENOUS

BS 3900: Part F11:1985

PAINTS AND VARNISHES

197

MS 133: PART F12:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F12 : DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 7253:1996

PAINTS AND VARNISHES

198

MS 133: PART F13:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F13 : DETERMINATION OF RESISTANCE TO FILIFORM CORROSION- STEEL SUBSTRATES

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 4623-1:2000

PAINTS AND VARNISHES

199

MS 133: PART F14:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F14 : DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11341:1994

PAINTS AND VARNISHES

200

MS 133: PART F15:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F15 : DETERMINATION OF RESISTANCE TO HUMIDITY (INTERMITTENT CONDENSATION)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11503:1995

PAINTS AND VARNISHES

201

MS 133: PART F16:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F16 : DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11507:1997

PAINTS AND VARNISHES

202

MS 133: PART F17:2003

METHODS OF TEST FOR PAINTS AND VARNISHES: PART F17: DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11997-1:1998

PAINTS AND VARNISHES

203

MS 133: PART F18:2003

METHODS OF TEST FOR PAINTS AND VARNISHES : PART F18 : DETERMINATION OF RESISTANCE TO CORROSION UNDER A WET (SALT FOG)/DRY/HUMIDITY CYCLE

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11997-1:1998

PAINTS AND VARNISHES

204

MS 284:1975 (CONFIRMED:2003)

SPECIFICATION FOR CARBON PAPER, HANDWRITING

85.060

INDIGENOUS

-

PULP, PAPER AND BOARD

205

MS 285:1975 (CONFIRMED:2003)

SPECIFICATION FOR PAPER (DUPLICATING COPY, LIQUID PROCESS)

85.080

INDIGENOUS

-

PULP, PAPER AND BOARD

206

MS 286:1975 (CONFIRMED:2003)

SPECIFICATION FOR CRAFT PAPER, WRAPPING (UNBLEACHED AND UNTREATED)

85.060

INDIGENOUS

-

PULP, PAPER AND BOARD

207

MS 398:1976 (CONFIRMED:2003)

SPECIFICATION FOR CORRUGATED FIBREBOARD BOXES

65.060

INDIGENOUS

-

PULP, PAPER AND BOARD

208

MS ISO 186:2003

PAPER AND BOARD - SAMPLING TO DETERMINE AVERAGE QUALITY (ISO 186:2002, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 186:2002

PULP, PAPER AND BOARD

209

MS ISO 8787:2003

PAPER AND BOARD - DETERMINATION OF CAPILLARY RISE - KLEMM METHOD (FIRST REVISION) (ISO 8787:1986, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8787:1986

PULP, PAPER AND BOARD

210

MS ISO/IEC GUIDE 50:2003

CHILD SAFETY AND STANDARDS - GENERAL GUIDELINES (ISO/IEC GUIDE 50:2001, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO/IEC GUIDE 50:2001

SAFETY OF TOYS

211

MS ISO 11609:2003

DENTISTRY - TOOTHPASTE - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:1995, IDT)

11.060.10

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11609:1995

SOAPS AND DETERGENTS

212

MS 1571:2003

SPECIFICATION FOR COPPER SULPHATE USED FOR POTABLE WATER SUPPLY

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

213

MS 1572:2003

SPECIFICATION FOR SODIUM ALUMINATE USED FOR POTABLE WATER SUPPLY

71.100.80

INDIGENOUS

BS EN 882:1997

WATER TREATMENT CHEMICALS

214

MS 1573:2003

SPECIFICATION FOR SODIUM FLUORIDE USED FOR POTABLE WATER SUPPLY

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

215

MS 1576:2003

SPECIFICATION FOR POTASSIUM PERMANGANATE USED FOR POTABLE WATER SUPPLY

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

216

MS 1584:2003

SPECIFICATION FOR CALCIUM HYPOCHLORITE USED FOR POTABLE WATER SUPPLY

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

217

MS 1718:2003

SPECIFICATION FOR SODIUM HYPOCHLORITE USED FOR PORTABLE WATER SUPPLY

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

218

MS 377:1976 (CONFIRMED:2004)

SPECIFICATION FOR SODIUM CARBONATE (TECHNICAL GRADE)

71.040.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

219

MS 431:1976 (CONFIRMED: 2004)

SPECIFICATION FOR METHANOL (TECHNICAL GRADE)

71.080.60

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

220

MS 1729: PART 2:2004

WRITING AND MARKING INSTRUMENTS:PART 2: SPECIFICATION FOR END CLOSURES

97.180, 97.190

INDIGENOUS

 

SAFETY OF TOYS

221

MS 290:1975 (CONFIRMED:2004)

SPECIFICATION FOR PAPER (DRAWING AND TRACING)

85.080

INDIGENOUS

 

PULP, PAPER AND BOARD

222

MS 328:1976 (CONFIRMED:2004)

SPECIFICATION FOR BLOTTING PAPER

85.080

INDIGENOUS

 

PULP, PAPER AND BOARD

223

MS 331:1976 (CONFIRMED:2004)

SPECIFICATION FOR FILTER PAPER FOR USE IN CHEMICAL ANALYSIS

85.080

INDIGENOUS

 

PULP, PAPER AND BOARD

224

MS ISO 13820:2004

PAPER, BOARD AND CORRUGATED FIBREBOARD - DESCRIPTION AND CALIBRATION OF COMPRESSION-TESTING EQUIPMENT (NOTE: TOTAL ADOPTION OF ISO 13820: 1996)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 13820: 1996

PULP, PAPER AND BOARD

225

MS 1728:2004

CHILD CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST

97.190

INDIGENOUS

 

SAFETY OF TOYS

226

MS 1724:2004

SPECIFICATION FOR SODIUM SILICOFLUORIDE USED FOR POTABLE WATER SUPPLY

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

227

MS 506:1977 (CONFIRMED:2004)

SPECIFICATION FOR AMMONIA (ANHYDROUS AND AQUEOUS)

83.040.01

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

228

MS ISO 15733:2005

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE STRESS-STRAIN BEHAVIOUR OF CONTINUOUS FIBER-REINFORCED COMPOSITIES AT ROOM TEMPERATURE (ISO 15733:2001, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15733:2001

FINE CERAMICS

229

MS ISO 17562:2005

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR LINEAR THERMAL EXPANSION OF MONOLITHIC CERAMICS BY PUSH ROD TECHNIQUE (ISO 17562:2001, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 17562:2001

FINE CERAMICS

230

MS 1818:2005

STANDARD TEST METHOD FOR BOILING POINT OF ENGINE COOLANTS (FIRST REVISION)

71.080

INDIGENOUS

ASTM D1176

GENERAL PURPOSE CHEMICALS

231

MS 1825:2005

TEST METHOD FOR RESERVE ALKALINITY OF ENGINE COOLANTS AND ANTIRUSTS

71.080

INDIGENOUS

ASTM D1123, ASTM D1176

GENERAL PURPOSE CHEMICALS

232

MS ISO 6142:2005

GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - GRAVIMETRIC METHOD (ISO 6142:2001, IDT)

71.040.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6142:2001

GENERAL PURPOSE CHEMICALS

233

MS ISO 9198:2005

PAPER, BOARD AND PULP - DETERMINATION OF WATER-SOLUBLE SULFATES (ISO 9198: 2001, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9198: 2001

PULP, PAPER AND BOARD

234

MS 1850: PART 4:2005

WATER QUALITY - SAMPLING - PART 4: GUIDANCE ON SAMPLING FROM LAKES, NATURAL AND MAN-MADE (ISO 5667 - PART 4:1987, MOD)

13.060.01

MODIFIED TO INTERNATIONAL STANDARD

ISO 5667 - PART 4:1987

SAMPLINGS (WATER QUALITY)

235

MS 1886:2005

TEST METHOD FOR pH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE

71.100.40

INDIGENOUS

ASTM E 70-97

SOAPS AND DETERGENTS

236

MS 1880: PART 4:2005

SOIL QUALITY - VOCABULARY PART 4: TERMS AND DEFINITIONS RELATED TO THE REHABILITATION OF SOILS AND SITES

13.080.01, 01040.13

INDIGENOUS

ISO 11074-4:1999

SOIL QUALITY

237

MS 1815:2005

GRANULAR ACTIVATED CARBON FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

238

MS 1816:2005

SAND AND GRAVEL FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

239

MS 1836:2005

HYDRATED LIME AND SLURRY LIME FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

240

MS 873:2005

POWDERED ACTIVATED CARBON FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION (FIRST REVISION)

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

241

MS ISO 20509:2006

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF OXIDATION RESISTANCE OF NON-OXIDE MONOLITHIC CERAMICS (ISO 20509:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20509:2003

FINE CERAMICS

242

MS ISO 20808:2006

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD (ISO 20808:2004, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20808:2004

FINE CERAMICS

243

MS ISO 24369:2006

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CONTENT OF COARSE PARTICLES IN CERAMIC POWDERS BY WET SIEVING METHOD (ISO 24369:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 24369:2005

FINE CERAMICS

244

MS 1920:2006

ENGINE COOLANT - ETHYLENE GLYCOL BASE FOR AUTOMOBILE AND LIGHT DUTY SERVICE - SPECIFICATION

71.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

245

MS 1922:2006

TEST METHOD FOR pH OF ENGINE COOLANTS AND ANTIRUSTS

71.080

INDIGENOUS

ASTM D 1287-91

GENERAL PURPOSE CHEMICALS

246

MS 744:1981 (CONFIRMED:2006)

SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM THIOSULPHATE, ANHYDROUS

37.040.30

INDIGENOUS

ISO 3300:1976

GENERAL PURPOSE CHEMICALS

247

MS 745:1981 (CONFIRMED:2006)

SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM THIOSULPHATE, CRYSTALLINE

37.040.30

INDIGENOUS

ISO 419-1972

GENERAL PURPOSE CHEMICALS

248

MS 746:1981 (CONFIRMED:2006)

SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM SULPHITE, ANHYDROUS

37.040.30

INDIGENOUS

ISO 418:1976

GENERAL PURPOSE CHEMICALS

249

MS 755:1981 (CONFIRMED:2006)

SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM METABISULPHITE, ANHYDROUS

37.040.30

INDIGENOUS

ISO 3627:1976

GENERAL PURPOSE CHEMICALS

250

MS 820:1983 (CONFIRMED:2006)

SPECIFICATION FOR SODIUM METABISULPHITE, TECHNICAL GRADE

71.040.40

INDIGENOUS

IS 248:1971

GENERAL PURPOSE CHEMICALS

251

MS 879:1984 (CONFIRMED: 2006)

SPECIFICATION FOR SODIUM SULPHITE, TECHNICAL GRADE

71.060.50

INDIGENOUS

IS 247:1972, ISO 418:1976

GENERAL PURPOSE CHEMICALS

252

MS 1255:2006

HOUSEHOLD INSECTICIDE PRODUCTS - PHYSICAL, CHEMICAL AND BIOLOGICAL EFFICACY REQUIREMENTS - SURFACE AND DIRECT SPRAY AEROSOL (FIRST REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

253

MS 1911: PART 1:2006

HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 1: GLASS CHAMBER METHOD

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

254

MS 1911: PART 2:2006

HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 2: PEET GRADY METHOD

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

255

MS 1911: PART 3:2006

HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 3: CYLINDER METHOD

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

256

MS 1911: PART 4:2006

HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 4: PLAQUE METHOD

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

257

MS 23: PART 1:2006

HOUSEHOLD INSECTICIDE PRODUCTS - PHYSICAL, CHEMICAL AND BIOLOGICAL EFFICACY REQUIREMENTS - MOSQUITO COIL (FOURTH REVISION)

65.100.01

INDIGENOUS

 

HOUSEHOLD PESTICIDES

258

MS 330:1976 (CONFIRMED:2006)

SPECIFICATION FOR HIGH WET-STRENGTH GREASEPROOF PAPER

85.080

INDIGENOUS

 

PULP, PAPER AND BOARD

259

MS ISO 11475:2006

PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, D65/10 (OUTDOOR DAYLIGHT) (ISO 11475:2004, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11475:2004

PULP, PAPER AND BOARD

260

MS ISO 4046-1:2006

PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 1: ALPHABETICAL INDEX (ISO 4046-1:2002, IDT)

85.020

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4046-1:2002

PULP, PAPER AND BOARD

261

MS ISO 4046-2:2006

PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 2: PULPING TERMINOLOGY (ISO 4046-2:2006, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4046-2:2006

PULP, PAPER AND BOARD

262

MS ISO 4046-3:2006

PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 3: PAPER-MAKING TERMINOLOGY (ISO 4046-3:2002, IDT)

85.020

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4046-3:2002

PULP, PAPER AND BOARD

263

MS ISO 4046-4:2006

PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 4: PAPER AND BOARD GRADES AND CONVERTED PRODUCTS

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4046-4:2006

PULP, PAPER AND BOARD

264

MS ISO 4046-5:2006

PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 5: PROPERTIES OF PULP, PAPER AND BOARD

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4046-5:2002

PULP, PAPER AND BOARD

265

MS ISO 6588-1:2006

PAPER, BOARD AND PULPS - DETERMINATION OF pH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION (ISO 6588-1:2005, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6588-1:2005

PULP, PAPER AND BOARD

266

MS ISO 6588-2:2006

PAPER, BOARD AND PULPS - DETERMINATION OF pH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION (ISO 6588-2:2005, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6588-2:2005

PULP, PAPER AND BOARD

267

MS 2014:2006

PESTICIDES AND OTHER AGROCHEMICALS - COMMON NAMES (ISO 1750:1981 AND ITS AMENDMENT 1:1982, ADDENDUM 1:1983, ADDENDUM 2:1983, AMENDMENT 2:1999, AMENDMENT 3:2001, MOD)

65.100.01

MODIFIED TO INTERNATIONAL STANDARD

ISO 1750:1981

PESTICIDES AND AGROCHEMICALS

268

MS ISO 257:2006

PESTICIDES AND OTHER AGROCHEMICALS - PRINCIPLES FOR THE SELECTION OF COMMON NAMES (ISO 257:1988, IDT)

65.100.01

IDENTICAL TO INTERNATIONAL STANDARD

ISO 257:1988

PESTICIDES AND AGROCHEMICALS

269

MS ISO 765:2006

PESTICIDES CONSIDERED NOT TO REQUIRE COMMON NAMES (ISO 765:1976, IDT)

65.100.01

IDENTICAL TO INTERNATIONAL STANDARD

ISO 765:1976

PESTICIDES AND AGROCHEMICALS

270

MS 2037:2006

WATER QUALITY - DETERMINATION OF TOTAL SUSPENDED SOLIDS BY FILTRATION THROUGH GLASS-FIBRE FILTERS

13.060.60

INDIGENOUS

 

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

271

MS 1850: PART 10:2006

WATER QUALITY - SAMPLING - PART 10: GUIDANCE ON SAMPLING OF WASTE WATERS (ISO 5667 - PART 10:1992, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667 - PART 10:1992

SAMPLINGS (WATER QUALITY)

272

MS 1850: PART 11:2006

WATER QUALITY - SAMPLING - PART 11: GUIDANCE ON SAMPLING OF GROUNDWATERS (ISO 5667: PART 11:1993, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667: PART 11:1993

SAMPLINGS (WATER QUALITY)

273

MS 1850: PART 13:2006

WATER QUALITY - SAMPLING - PART 13: GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS (ISO 5667 - PART 13:1997, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667 - PART 13:1997

SAMPLINGS (WATER QUALITY)

274

MS 1850: PART 15:2006

WATER QUALITY - SAMPLING - PART 15: GUIDANCE ON PRESERVATION AND HANDLING OF SLUDGE AND SEDIMENT SAMPLES (ISO 5667- PART 15:1999, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667- PART 15:1999

SAMPLINGS (WATER QUALITY)

275

MS 1850: PART 6:2006

WATER QUALITY - SAMPLING - PART 6: GUIDANCE ON SAMPLING OF RIVERS AND STREAMS (ISO 5667 - PART 6:1990, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667 - PART 6:1990

SAMPLINGS (WATER QUALITY)

276

MS 1880: PART 1:2006

SOIL QUALITY - VOCABULARY PART 1: TERMS AND DEFINITIONS RELATING TO THE PROTECTION AND POLLUTION OF THE SOIL (ISO 11074-1:1996, MOD)

13.080.01

MODIFIED TO INTERNATIONAL STANDARD

ISO 11074-1:1996

SOIL QUALITY

277

MS ISO 17092:2007

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CORROSION RESISTANCE OF MONOLITHIC CERAMICS IN ACID AND ALKALINE SOLUTIONS (ISO 17092:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 17092:2005

FINE CERAMICS

278

MS ISO 18452:2007

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER (ISO 18452:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 18452:2005

FINE CERAMICS

279

MS ISO 18753:2007

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ABSOLUTE DENSITY OF CERAMIC POWDERS BY PYKNOMETER

(ISO 18753:2004, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 18753:2004

FINE CERAMICS

280

MS ISO 20505:2007

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE INTERLAMINAR SHEAR STRENGTH OF CONTINUOUS-FIBRE-REINFORCED COMPOSITES AT AMBIENT TEMPERATURE BY THE COMPRESSION OF DOUBLE-NOTCHED TEST PIECES AND BY THE LOSIPESCU TEST (ISO 20505:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20505:2005

FINE CERAMICS

281

MS ISO 20506:2007

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE IN-PLANE SHEAR STRENGTH OF CONTINUOUS-FIBRE-REINFORCED COMPOSITES AT AMBIENT TEMPERATURE BY LOSIPESCU TEST (ISO 20506:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20506:2005

FINE CERAMICS

282

MS ISO 24370:2007

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY CHEVRON-NOTCHED BEAM (CNB) METHOD (ISO 24370:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 24370:2005

FINE CERAMICS

283

MS 1326: PART 3:2007

HOUSEHOLD INSECTICIDE PRODUCTS-COCKROACH BAIT-EVALUATION METHOD FOR BIOLOGICAL EFFICACY (SECOND REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

284

MS 1497:2007

HOUSEHOLD INSECTICIDE PRODUCTS - PERSONAL MOSQUITO REPELLENT - EVALUATION METHOD FOR BIOLOGICAL EFFICACY (FIRST REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

285

MS 1985:2007

HOUSEHOLD INSECTICIDE PRODUCTS - ANT BAIT - EVALUATION METHOD FOR BIOLOGICAL EFFICACY

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

286

MS 1986:2007

HOUSEHOLD INSECTICIDE PRODUCTS - CONTAINERISED ANT BAIT - SPECIFICATION

65.100.10

INDIGENOUS

 

HOUSEHOLD PESTICIDES

287

MS 1888:2007

WATER QUALITY - DETECTION AND ENUMERATION OF COLIFORM ORGANISMS, THERMOTOLERANT COLIFORM ORGANISMS AND PRESUMPTIVE ESCHERICHIA COLI - MULTIPLE TUBE (MOST PROBABLE NUMBER) METHOD (ISO 9308-2:1990, MOD)

07.100.20

MODIFIED TO INTERNATIONAL STANDARD

ISO 9308-2:1990

MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)

288

MS 134:2007

LATEX EMULSION PAINT FOR EXTERIOR AND INTERIOR USE - SPECIFICATION (THIRD REVISION)

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

289

MS 164:2007

ROAD MARKING PAINTS - SPECIFICATION (THIRD REVISION)

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

290

MS ISO 11093-4:2007

PAPER AND BOARD - TESTING OF CORES - PART 4: MEASUREMENT OF DIMENSIONS (ISO 11093-4:1997, IDT)

85.080

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-4:1997

PULP, PAPER AND BOARD

291

MS ISO 2758:2007

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2758:2001

PULP, PAPER AND BOARD

292

MS ISO 2759:2007

BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2001)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2759:2001

PULP, PAPER AND BOARD

293

MS ISO 534:2007

PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2005, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 534:2005

PULP, PAPER AND BOARD

294

MS ISO 5667: PART 17:2007

WATER QUALITY - SAMPLING - PART 17: GUIDANCE ON SAMPLING OF SUSPENDED SEDIMENTS (ISO 5667-17:2000, IDT)

13.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667-17:2000

SAMPLINGS (WATER QUALITY)

295

MS ISO 5667: PART 18:2007

WATER QUALITY - SAMPLING - PART 18: GUIDANCE ON SAMPLING OF GROUNDWATER AT CONTAMINATED AREAS (ISO 5667-18:2001, MOD)

13.060

MODIFIED TO INTERNATIONAL STANDARD

ISO 5667-18:2001

SAMPLINGS (WATER QUALITY)

296

MS 1999:2007

SURFACE ACTIVE AGENTS - DETERMINATION OF FOAMING POWER - PERFORATED DISC BEATING METHOD

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

297

MS 2006:2007

SURFACE ACTIVE AGENTS - FOAMING POWER AND ANTIFOAMING POWER - TURBINE STIRRING METHOD

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

298

MS ISO 2272:2007

SURFACE ACTIVE AGENTS - SOAPS - DETERMINATION OF LOW CONTENTS OF FREE GLYCEROL BY MOLECULAR ABSORPTION SPECTROMETRY (ISO 2272:1989, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2272:1989,

SOAPS AND DETERGENTS

299

MS 1454:2007

LIQUID POLYALUMINIUM CHLORIDE FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION (FIRST REVISION)

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

300

MS 1928:2007

POLYACRYLAMIDES FOR USE IN PORTABLE WATER SUPPLY - SPECIFICATION

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

301

MS 1929:2007

POLYAMINES FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

302

MS 1930:2007

POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE) FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

303

MS 1931:2007

PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - EXPANDED ALUMINOSILICATE

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

304

MS ISO 17561:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ELASTIC MODULI OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SONIC RESONANCE (ISO 17561:2002/Cor 1:2007, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 17561:2002/Cor 1:2007

FINE CERAMICS

305

MS ISO 17565:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF MONOLITHIC CERAMICS AT ELEVATED TEMPERATURE (ISO 17565:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 17565:2003

FINE CERAMICS

306

MS ISO 18756:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY THE SURFACE CRACK IN FLEXURE (SCF) METHOD (ISO 18756:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 18756:2003

FINE CERAMICS

307

MS ISO 18757:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF SPECIFIC SURFACE AREA OF CERAMIC POWDERS BY GAS ADSORPTION USING THE BET METHOD (ISO 18757:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 18757:2003

FINE CERAMICS

308

MS ISO 20507:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - VOCABULARY (ISO 20507:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20507:2003

FINE CERAMICS

309

MS ISO 20508:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF LIGHT TRANSMITTANCE OF CERAMIC FILMS WITH TRANSPARENT SUBSTRATE (FIRST REVISION) (ISO 20508:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20508:2003

FINE CERAMICS

310

MS ISO 22197-1:2008

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-1:2007, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22197-1:2007

FINE CERAMICS

311

MS 511:2008

ZINC OXIDE FOR USE IN RUBBER - SPECIFICATION (FIRST REVISION)

71.060.20

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

312

MS ISO 13829:2008

WATER QUALITY - DETERMINATION OF THE GENOTOXICITY OF WATER AND WASTE WATER USING THE UMU-TEST (ISO 13829:2000, IDT)

13.060.70

IDENTICAL TO INTERNATIONAL STANDARD

ISO 13829:2000

MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)

313

MS 133: PART A1:2008

PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - PART A1: SAMPLING (SECOND REVISION) (ISO 15528:2000, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15528:2000

PAINTS AND VARNISHES

314

MS 133: PART A10:2008

PAINTS AND VARNISHES - DETERMINATION OF FLASH POINT - PART A10 - CLOSED CUP EQUILIBRIUM METHOD (SECOND REVISION) (ISO 1523:2002, IDT)

87.040, 75.080

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1523:2002

PAINTS AND VARNISHES

315

MS 133: PART A12:2008

PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A12: PYKNOMETER METHOD (SECOND REVISION) (ISO 2811-1:1997, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2811-1:1997

PAINTS AND VARNISHES

316

MS 133: PART A2:2008

PAINTS AND VARNISHES - PART A2: EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING (SECOND REVISION) (ISO 1513:1992, COR. 1:1994, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1513:1992, COR. 1:1994

PAINTS AND VARNISHES

317

MS 133: PART A3:2008

PAINTS AND VARNISHES - PART A3: STANDARD PANELS FOR TESTING (SECOND REVISION) (ISO 1514:2004, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 1514:2004

PAINTS AND VARNISHES

318

MS 133: PART A7:2008

PAINTS AND VARNISHES - DETERMINATION OF VISCOSITY USING ROTARY VISCOMETERS - PART A7: CONE-AND-PLATE VISCOMETER OPERATED AT A HIGH RATE OF SHEAR (SECOND REVISION)(ISO 2884-1:1999, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2884-1:1999

PAINTS AND VARNISHES

319

MS 133: PART F19:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART F19: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2000 (2005), IDT) 

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11997-2:2000 (2005)

PAINTS AND VARNISHES

320

MS 133: PART F20:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART F20: ALUMINIUM SUBSTRATES (ISO 4623-2:2003, COR. 1:2005, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 4623-2:2003, COR. 1:2005

PAINTS AND VARNISHES

321

MS 133: PART F21:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART F21: PROCEDURE FOR EXPOSING TEST SPECIMENS IN CONDENSATION-WATER ATMOSPHERES (ISO 6270-2:2005, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6270-2:2005

PAINTS AND VARNISHES

322

MS 133: PART F8:2008

PAINTS AND VARNISHES - PART F8: DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE (ISO 3231:1993 (2003), MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 3231:1993 (2003)

PAINTS AND VARNISHES

323

MS 133: PART G10:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART G10: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2007, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2812-3:2007

PAINTS AND VARNISHES

324

MS 133: PART G11:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS -PART G11: SPOTTING METHODS (ISO 2812-4:2007, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2812-4:2007

PAINTS AND VARNISHES

325

MS 133: PART G12:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS -PART G12: TEMPERATURE-GRADIENT OVEN METHOD (ISO 2812-5:2007, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2812-5:2007

PAINTS AND VARNISHES

326

MS 133: PART G5:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART G5: IMMERSION IN LIQUIDS OTHER THAN WATER (FIRST REVISION) (ISO 2812-1:2007, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2812-1:2007

PAINTS AND VARNISHES

327

MS 133: PART G7:2008

PAINTS AND VARNISHES - PART G7: DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:1998 (2003), MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 3248:1998 (2003)

PAINTS AND VARNISHES

328

MS 133: PART G8:2008

PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART G8: WATER IMMERSION METHOD (ISO 2812-2:2007, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2812-2:2007

PAINTS AND VARNISHES

329

MS 133: PART G9:2008

PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART G9: DISH METHOD FOR FREE FILMS (ISO 7783-1:1996/COR.1:1998, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 7783-1:1996/COR.1:1998

PAINTS AND VARNISHES

330

MS 133: PART H1:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (FIRST REVISION) (ISO 4628-1:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-1:2003

PAINTS AND VARNISHES

331

MS 133: PART H10:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H10: ASSESSMENT OF DEGREE OF FILIFORM CORROSION (ISO 4628-10:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-10:2003

PAINTS AND VARNISHES

332

MS 133: PART H2:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H2: ASSESSMENT OF DEGREE OF BLISTERING (FIRST REVISION) (ISO 4628-2:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-2:2003

PAINTS AND VARNISHES

333

MS 133: PART H3:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H3: ASSESSMENT OF DEGREE OF RUSTING (FIRST REVISION) (ISO 4628-3:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-3:2003

PAINTS AND VARNISHES

334

MS 133: PART H4 : 2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H4: ASSESSMENT OF DEGREE OF CRACKING (FIRST REVISION) (ISO 4628-4:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-4:2003

PAINTS AND VARNISHES

335

MS 133: PART H5:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H5: ASSESSMENT OF DEGREE OF FLAKING (FIRST REVISION) (ISO 4628-5:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-5:2003

PAINTS AND VARNISHES

336

MS 133: PART H6:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H6: ASSESSMENT OF DEGREE OF OF CHALKING BY TAPE METHOD (ISO 4628-6:2007, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-6:2007

PAINTS AND VARNISHES

337

MS 133: PART H7:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2003, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4628-7:2003

PAINTS AND VARNISHES

338

MS 133: PART H8:2008

PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE (ISO 4628-8:2005,

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 4628-8:2005

PAINTS AND VARNISHES

339

MS 133: PART J1:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING (ISO 8130-1:1992 (2007), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-1:1992 (2007)

PAINTS AND VARNISHES

340

MS 133: PART J10:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J10: DETERMINATION OF DEPOSITION EFFICIENCY (ISO 8130-10:1998 (2003), MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 8130-10:1998 (2003)

PAINTS AND VARNISHES

341

MS 133: PART J11:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J11: INCLINED-PLANE FLOW TEST (ISO 8130-11:1997(2007), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-11:1997(2007)

PAINTS AND VARNISHES

342

MS 133: PART J12:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J12: DETERMINATION OF COMPATIBILITY (ISO 8130-12:1998(2003), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-12:1998(2003)

PAINTS AND VARNISHES

343

MS 133: PART J13:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION (ISO 8130-13:2001 (2006), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-13:2001 (2006)

PAINTS AND VARNISHES

344

MS 133: PART J2:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) (ISO 8130-2:1992 (2007), MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 8130-2:1992 (2007)

PAINTS AND VARNISHES

345

MS 133: PART J3:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER (ISO 8130-3:1992 (2007), MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 8130-3:1992 (2007)

PAINTS AND VARNISHES

346

MS 133: PART J4:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J4: CALCULATION OF LOWER EXPLOSION LIMIT (ISO 8130-4:1992 (2007) AND ITS CORRIGENDUM 1:1993, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-4:1992 (2007) AND ITS CORRIGENDUM 1:1993

PAINTS AND VARNISHES

347

MS 133: PART J5:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J5: DETERMINATION OF FLOW PROPERTIES OF A POWDER/AIR MIXTURE (ISO 8130-5:1992 (2007), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-5:1992 (2007)

PAINTS AND VARNISHES

348

MS 133: PART J6:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J6: DETERMINATION OF GEL TIME OF THERMOSETTING COATING POWDERS AT A GIVEN TEMPERATURE (ISO 8130-6:1992 (2007) AND ITS AMENDMENT 1:1998, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-6:1992 (2007) AND ITS AMENDMENT 1:1998

PAINTS AND VARNISHES

349

MS 133: PART J7:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J7: DETERMINATION OF LOSS OF MASS ON STOVING (ISO 8130-7:1992 (2007), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-7:1992 (2007)

PAINTS AND VARNISHES

350

MS 133: PART J8:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS (ISO 8130-8:1994(2004), MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 8130-8:1994(2004)

PAINTS AND VARNISHES

351

MS 133: PART J9:2008

PAINTS AND VARNISHES - COATING POWDERS - PART J9: SAMPLING (ISO 8130-9:1992 (2007), IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8130-9:1992 (2007)

PAINTS AND VARNISHES

352

MS ISO 11093-7:2008

PAPER AND BOARD - TESTING OF CORES - PART 7: DETERMINATION OF FLEXURAL MODULUS BY THE THREE-POINT METHOD (ISO 11093-7:1997, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-7:1997

PULP, PAPER AND BOARD

353

MS ISO 11093-8:2008

PAPER AND BOARD - TESTING OF CORES - PART 8: DETERMINATION OF NATURAL FREQUENCY AND FLEXURAL MODULUS BY EXPERIMENTAL MODAL ANALYSIS (ISO 11093-8:1997, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-8:1997

PULP, PAPER AND BOARD

354

MS ISO 22891:2008

PAPER - DETERMINATION OF TRANMITTANCE BY DIFFUSE REFLECTANCE MEASUREMENT (ISO 22891:2007, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22891:2007

PULP, PAPER AND BOARD

355

MS ISO 23714:2008

PULPS - DETERMINATION OF WATER RETENTION VALUE (WRV) (ISO 23714:2007, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 23714:2007

PULP, PAPER AND BOARD

356

MS ISO 2469:2008

PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR

(FIRST REVISION) (ISO 2469:2007, IDT)

85.040, 85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2469:2007

PULP, PAPER AND BOARD

357

MS ISO 3037:2008

CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2007, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3037:2007

PULP, PAPER AND BOARD

358

MS ISO 8124-2: 2008

Safety of Toys - Part 2 : Flammability (IDT, ISO 8124-2:2007)

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-2:2007

SAFETY OF TOYS

359

MS 699:2008

ALUMINIUM SULPHATE USED FOR POTABLE WATER SUPPLY - SPECIFICATION (SECOND REVISION)

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

360

MS 382:2008

TECHNICAL MALATHION FOR INSECTICIDAL PREPARATIONS - SPECIFICATION (FIRST REVISION)

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

361

MS 1817:2009

CERAMIC TABLEWARE - SPECIFICATION (FIRST REVISION)

67.250, 81.040.30, 81.060.20, 97.040.60

INDIGENOUS

 

CLAY & CLAY PRODUCTS

362

MS ISO 14704:2009

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (FIRST REVISION)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14704:2008

FINE CERAMICS

363

MS ISO 14705:2009

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (FIRST REVISION)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14705:2009

FINE CERAMICS

364

MS ISO 26423:2009

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF COATING THICKNESS BY CRATER-GRINDING METHOD (ISO 26423:2009, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 26423:2009

FINE CERAMICS

365

MS ISO 26602:2009

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS (ISO 26602:2009, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 26602:2009

FINE CERAMICS

366

MS 2258:2009

QUICKLIME, HYDRATED LIME, PUTTY LIME AND LIMESTONE FOR CHEMICAL AND INDUSTRIAL USES - SPECIFICATION

91.100.10

INDIGENOUS

 

LIME & LIME PRODUCTS

367

MS ISO 217:2009

PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2008, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 217:2008

PULP, PAPER AND BOARD

368

MS ISO 302:2009

PULPS - DETERMINATION OF KAPPA NUMBER (ISO 302:2004, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 302:2004

PULP, PAPER AND BOARD

369

MS ISO 5631-2:2009

PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) (ISO 5631-2:2008, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5631-2:2008

PULP, PAPER AND BOARD

370

MS ISO 5631-3:2009

PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 DEGREES) (ISO 5631-3:2008, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5631-3:2008

PULP, PAPER AND BOARD

371

MS 1850-14:2009

WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE OF ENVIRONMENTAL WATER SAMPLING AND HANDLING (ISO 5667- 14: 1998, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667- 14: 1998

SAMPLINGS (WATER QUALITY)

372

MS 1880-2:2009

SOIL QUALITY - VOCABULARY PART 2: TERMS AND DEFINITIONS RELATING TO SAMPLING (ISO 11074:2005, MOD)

13.080.01

MODIFIED TO INTERNATIONAL STANDARD

ISO 11074-2:2005

SOIL QUALITY

373

MS 645:2010

ETHANOL FOR INDUSTRIAL USE - SPECIFICATION (FIRST REVISION)

71.080.60

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

374

MS 852:2010

PHOSPHORIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION)

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

375

MS ISO 1388-1:2010

ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 1 : GENERAL (ISO 1388-1:1981, IDT)

71.080.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1388-1:1981

GENERAL PURPOSE CHEMICALS

376

MS ISO 1388-12:2010

ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 12 : DETERMINATION OF PERMANGANATE TIME (ISO 1388-12:1981, IDT)

71.080.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1388-12:1981

GENERAL PURPOSE CHEMICALS

377

MS ISO 1388-2:2010

ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 2 : DETECTION OF ALKALINITY OR DETERMINATION OF ACIDITY TO PHENOLPHTHALEIN (ISO 1388-2:1981, IDT)

71.080.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1388-2:1981

GENERAL PURPOSE CHEMICALS

378

MS ISO 1388-4:2010

ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 4 : ESTIMATION OF CONTENT OF CARBONYL COMPOUNDS PRESENT IN MODERATE AMOUNTS - TITRIMETRIC METHOD (ISO 1388-4:1981, IDT)

71.080.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1388-4:1981

GENERAL PURPOSE CHEMICALS

379

MS ISO 1388-6:2010

ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 6 : TEST FOR MISCIBILITY WITH WATER (ISO 1388-6:1981, IDT)

71.080.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1388-6:1981

GENERAL PURPOSE CHEMICALS

380

MS ISO 1388-7:2010

ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 7 : DETERMINATION OF METHANOL CONTENT [METHANOL CONTENTS BETWEEN 0.01 AND 0.20 % (V/V)] - PHOTOMETRIC METHOD (ISO 1388-7:1981, IDT)

71.080.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1388-7:1981

GENERAL PURPOSE CHEMICALS

381

MS ISO 2211:2010

LIQUID CHEMICAL PRODUCTS - MEASUREMENT OF COLOUR IN HAZEN UNITS (PLATINUM-COBALT SCALE) (ISO 2211:1973, IDT)

71.040.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2211:1973

GENERAL PURPOSE CHEMICALS

382

MS ISO 759:2010

VOLATILE ORGANIC LIQUIDS FOR INDUSTRIAL USE - DETERMINATION OF DRY RESIDUE AFTER EVAPORATION ON A WATER BATH - GENERAL METHOD(ISO 759:1981, IDT)

71.040.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 759:1981

GENERAL PURPOSE CHEMICALS

383

MS 1256:2010

HOUSEHOLD PESTICIDE PRODUCTS - RAT BAIT - SPECIFICATION (FIRST REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

384

MS 1257:2010

HOUSEHOLD INSECTICIDE PRODUCTS - AEROSOL AGAINST FLYING INSECTS - SPECIFICATION (FIRST REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

385

MS 1326-2:2010

HOUSEHOLD INSECTICIDE PRODUCTS - CONTAINERISED COCKROACH BAIT - SPECIFICATION (FIRST REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

386

MS 850:2010

LIMESTONE, QUICKLIME AND HYDRATED LIME - METHODS FOR CHEMICAL ANALYSIS (SECOND REVISION)

71.040.40

INDIGENOUS

 

LIME & LIME PRODUCTS

387

MS 133-A15:2010

PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A15: IMMERSED BODY (PLUMMET) METHOD (ISO 2811-2:1997, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2811-2:1997

PAINTS AND VARNISHES

388

MS 133-A16:2010

PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A16: OSCILLATION METHOD (ISO 2811-3:1997, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2811-3:1997

PAINTS AND VARNISHES

389

MS 133-A17:2010

PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A17: PRESSURE CUP METHOD (ISO 2811-4:1997, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2811-4:1997

PAINTS AND VARNISHES

390

MS 133-A18:2010

PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PART A18: PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING (ISO 9514:2005, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9514:2005

PAINTS AND VARNISHES

391

MS 133-A19:2010

PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART A19: DIFFERENCE METHOD (ISO 11890-1:2007, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11890-1:2007

PAINTS AND VARNISHES

392

MS 133-A20:2010

PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART A20: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2006, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 11890-2:2006

PAINTS AND VARNISHES

393

MS 133-A21:2010

PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART A21: CENTRIFUGE METHOD (ISO 14680-1:2000, IDT)

87.060.10

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14680-1:2000

PAINTS AND VARNISHES

394

MS 133-A22:2010

PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART A22: ASHING METHOD (ISO 14680-2:2000, IDT)

87.060.10

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14680-2:2000

PAINTS AND VARNISHES

395

MS 133-A23:2010

PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART A23: FILTRATION METHOD (ISO 14680-3:2000, IDT)

87.060.10

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14680-3:2000

PAINTS AND VARNISHES

396

MS 133-A9:2010

PAINTS AND VARNISHES - PART A9: CONSISTENCY OF PAINTS MEASURING KREBS UNIT (KU) VISCOSITY USING A STORMER-TYPE VISCOMETER (SECOND REVISION)

87.040

INDIGENOUS

ASTM D 562-01 (2005)

PAINTS AND VARNISHES

397

MS 133-B12:2010

PAINTS AND VARNISHES - DETERMINATION OF TOTAL MERCURY - PART B12: FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD (ISO 7252:1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 7252:1984

PAINTS AND VARNISHES

398

MS 133-B13:2010

PAINTS AND VARNISHES - PART B13: PREPARATION OF ACID EXTRACTS FROM PAINTS IN LIQUID OR POWDER FORM (ISO 6713:1984, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6713:1984

PAINTS AND VARNISHES

399

MS 133-B2:2010

PAINTS AND VARNISHES - PART B2: DETERMINATION OF NON-VOLATILE-MATTER CONTENT (SECOND REVISION) (ISO 3251:2008, IDT)

83.080.01, 87.040, 87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3251:2008

PAINTS AND VARNISHES

400

MS 133-C3:2010

PAINTS AND VARNISHES - DRYING TESTS - PART C3: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME (SECOND REVISION) (ISO 9117-1:2009, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9117-1:2009

PAINTS AND VARNISHES

401

MS 133-C5:2010

PAINTS AND VARNISHES - PART C5: DETERMINATION OF FILM THICKNESS (SECOND REVISION)(ISO 2808:2007, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2808:2007

PAINTS AND VARNISHES

402

MS 133-C6:2010

PAINTS AND VARNISHES - PART C6: DETERMINATION OF FINENESS OF GRIND (SECOND REVISION) (ISO 1524:2000, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1524:2000

PAINTS AND VARNISHES

403

MS 133-C8:2010

PAINTS AND VARNISHES - PART C8: PRINT-FREE TEST (ISO 3678:1976, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 3678:1976

PAINTS AND VARNISHES

404

MS 133-D12:2010

PAINTS AND VARNISHES - PART D12: DETERMINATION OF REFLECTION HAZE ON PAINT FILMS AT 20 DEGREES (ISO 13803:2000, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 13803:2000

PAINTS AND VARNISHES

405

MS 133-D6:2010

PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART D6: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE (FIRST REVISION) (ISO 6504-3:2006, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6504-3:2006

PAINTS AND VARNISHES

406

MS 133-E11:2010

PAINTS AND VARNISHES - PART E11: BEND TEST (CONICAL MANDREL) (FIRST REVISION) (ISO 6860:2006, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6860:2006

PAINTS AND VARNISHES

407

MS 133-E20:2010

PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART E20: FALLING-WEIGHT TEST, SMALL-AREA INDENTER (ISO 6272-2:2002, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6272-2:2002

PAINTS AND VARNISHES

408

MS 133-E3:2010

PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART E3: FALLING-WEIGHT TEST, LARGE-AREA INDENTER (SECOND REVISION) (ISO 6272-1:2002, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 6272-1:2002

PAINTS AND VARNISHES

409

MS 133-E4:2010

PAINTS AND VARNISHES - PART E4: CUPPING TEST (SECOND REVISION) (ISO 1520:2006, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 1520:2006

PAINTS AND VARNISHES

410

MS 133-E5:2010

PAINTS AND VARNISHES - PART E5: PENDULUM DAMPING TEST (SECOND REVISION) (ISO 1522:2006, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 1522:2006

PAINTS AND VARNISHES

411

MS 133-E6:2010

PAINTS AND VARNISHES - PART E6: CROSS-CUT TEST (SECOND REVISION) (ISO 2409:2007, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2409:2007

PAINTS AND VARNISHES

412

MS 133-E9:2010

PAINTS AND VARNISHES - PART E9: BUCHHOLZ INDENTATION TEST (FIRST REVISION) (ISO 2815:2003, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2815:2003

PAINTS AND VARNISHES

413

MS 904:2010

PAINTS AND VARNISHES - TERMS AND DEFINITIONS (FIRST REVISION) (ISO 4618:2006, IDT)

01.040.87, 87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4618:2006

PAINTS AND VARNISHES

414

MS 18:2010

TOILET TISSUE PAPER - SPECIFICATION (FIRST REVISION)

85.080

INDIGENOUS

 

PULP, PAPER AND BOARD

415

MS 2362:2010

RECOVERED PAPER - GRADE DESCRIPTION AND MOISTURE INSPECTION PROCEDURES

85.060

INDIGENOUS

 

PULP, PAPER AND BOARD

416

MS ISO 14487:2010

PULPS - STANDARD WATER FOR PHYSICAL TESTING (ISO 14487:1997, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14487:1997

PULP, PAPER AND BOARD

417

MS ISO 15754:2010

PAPER AND BOARD - DETERMINATION OF z-DIRECTIONAL TENSILE STRENGTH (ISO 15754:2009, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15754:2009

PULP, PAPER AND BOARD

418

MS ISO 1924-2:2010

PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 mm/min) (FIRST REVISION) (ISO 1924-2:2008, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1924-2:2008

PULP, PAPER AND BOARD

419

MS ISO 2470-1:2010

PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) (FIRST REVISION) (ISO 2470-1:2009, IDT)

85.040, 85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2470-1:2009

PULP, PAPER AND BOARD

420

MS ISO 2471:2010

PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (FIRST REVISION) (ISO 2471:2008, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2471:2008

PULP, PAPER AND BOARD

421

MS ISO 287:2010

PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN DRYING METHOD (FIRST REVISION) (ISO 287:2009, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 287:2009

PULP, PAPER AND BOARD

422

MS ISO 3689:2010

PAPER AND BOARD - DETERMINATION OF BURSTING STRENGTH AFTER IMMERSION IN WATER (ISO 3689:1983, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3689:1983

PULP, PAPER AND BOARD

423

MS ISO 5269-2:2010

PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 2: RAPID-KOTHEN METHOD (ISO 5269-2:2004, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5269-2:2004

PULP, PAPER AND BOARD

424

MS ISO 5269-3:2010

PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 3: CONVENTIONAL AND RAPID-KOTHEN SHEET FORMERS USING A CLOSED WATER SYSTEM (ISO 5269-3:2008, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5269-3:2008

PULP, PAPER AND BOARD

425

MS ISO 5627:2010

PAPER AND BOARD - DETERMINATION OF SMOOTHNESS (BEKK METHOD) (ISO 5627:1995, Cor. 1:2002, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5627:2002

PULP, PAPER AND BOARD

426

MS ISO 5630-6:2010

PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5630-6:2009

PULP, PAPER AND BOARD

427

MS ISO 5631-1:2010

PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFELCTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) (FIRST REVISION) (ISO 5631-1:2009, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5631-1:2009

PULP, PAPER AND BOARD

428

MS ISO 9416:2010

PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) (ISO 9416:2009, IDT)

85.040, 85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9416:2009

PULP, PAPER AND BOARD

429

MS ISO 9895:2010

PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST (ISO 9895:2008, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9895:2008

PULP, PAPER AND BOARD

430

MS ISO 1065:2010

NON-IONIC SURFACE-ACTIVE AGENTS OBTAINED FROM ETHYLENE OXIDE AND MIXED NON-IONIC SURFACE-ACTIVE AGENTS - DETERMINATION OF CLOUD POINT (ISO 1065:1991, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1065:1991

SOAPS AND DETERGENTS

431

MS ISO 2870:2010

SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC-ACTIVE MATTER HYDROLYSABLE AND NON-HYDROLYSABLE UNDER ACID CONDITIONS (ISO 2870:2009, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2870:2009

SOAPS AND DETERGENTS

432

MS ISO 4313:2010

WASHING POWDERS - DETERMINATION OF TOTAL PHOSPHORUS (V) OXIDE CONTENT - QUINOLINE PHOSPHOMOLYBDATE GRAVIMETRIC METHOD (ISO 4313:1976, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4313:1976

SOAPS AND DETERGENTS

433

MS ISO 6841:2010

SURFACE ACTIVE AGENTS - TECHNICAL STRAIGHT-CHAIN SODIUM ALKYLBENZENESULFONATES - DETERMINATION OF MEAN RELATIVE MOLECULAR MASS BY GAS-LIQUID CHROMATOGRAPHY (ISO 6841:1988, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6841:1988

SOAPS AND DETERGENTS

434

MS ISO 8799:2010

SURFACE ACTIVE AGENTS - SULFATED ETHOXYLATED ALCOHOLS AND ALKYLPHENOLS - DETERMINATION OF CONTENT OF UNSULFATED MATTER (ISO 8799:2009, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8799:2009

SOAPS AND DETERGENTS

435

MS 2320:2010

DRINKING WATER - QUALITY REQUIREMENTS

13.060.20

INDIGENOUS

 

WATER QUALITY

436

MS ISO 10703:2010

WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (FIRST REVISION) (ISO 10703:2007, IDT)

13.060.60, 17.240

IDENTICAL TO INTERNATIONAL STANDARD

ISO 10703:2007

WATER QUALITY

437

MS ISO 6107-1:2010

WATER QUALITY - VOCABULARY - PART 1 (FIRST REVISION) (ISO 6107-1:2004, IDT)

13.060.01, 01.040.13;  

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-1:2004

WATER QUALITY

438

MS ISO 6107-2:2010

WATER QUALITY - VOCABULARY - PART 2 (FIRST REVISION) (ISO 6107-2:2006, IDT)

13.060.01, 01.040.13;  

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-2:2006

WATER QUALITY

439

MS ISO 6107-5:2010

WATER QUALITY - VOCABULARY - PART 5 (FIRST REVISION) (ISO 6107-5:2004, IDT)

13.060.01, 01.040.13;  

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-5:2004

WATER QUALITY

440

MS ISO 6107-6:2010

WATER QUALITY - VOCABULARY - PART 6 (FIRST REVISION) (ISO 6107-6:2004, IDT)

13.060.01, 01.040.13;  

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-6:2004

WATER QUALITY

441

MS ISO 6107-7:2010

WATER QUALITY - VOCABULARY - PART 7 (FIRST REVISION) (ISO 6107-7:2006, IDT)

13.060.01, 01.040.13;  

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-7:2006

WATER QUALITY

442

MS ISO 9696:2010

WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD (FIRST REVISION) (ISO 9696:2007, IDT)

13.060.60, 17.240

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9696:2007

WATER QUALITY

443

MS 133: PART A13:1994

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART A13 : DETERMINATION OF FLOW TIME BY USE OF ISO 2431 FLOW CUPS

87.040

INDIGENOUS

ISO 2431-1993

PAINTS AND VARNISHES

444

MS 133: PART B4:1997

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART B4 : DETERMINATION OF LEAD IN LOW LEAD PAINTS AND SIMILAR MATERIALS (FIRST REVISION)

87.040

INDIGENOUS

ISO 6503:1984

PAINTS AND VARNISHES

445

MS 133: PART B5:1997

(CONFIRMED:2011)

METHOD OF TEST FOR PAINTS AND VERNISHES: PART B5: DETERMINATION OF SOLUBLE LEAD BY ATOMIC ABSORPTION SPECTROMETRIC METHOD AND DITHIZONE SPECTROPHOTOMETRIC METHOD

87.040

INDIGENOUS

ISO 3856-1:1984

PAINTS AND VARNISHES

446

MS 133: PART B10:1999

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES: PART B10: DETERMINATION OF SOLUBLE TOTAL CHROMIUM CONTENT OF THE LIQUID PORTION OF THE PAINT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD

87.040

INDIGENOUS

ISO 3856/6:1984

PAINTS AND VARNISHES

447

MS 133: PART B11:1999

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES: PART B11: DETERMINATION OF SOLUBLE MERCURY CONTENT OF THE PIGMENT PORTION OF THE PAINT AND OF THE LIQUID PORTION OF WATER - DILUTABLE PAINTS - FLAMELESS ATOMIC ABSORPTION SPECTROMERTIC METHOD (ISO 3856/7: 1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3856/7:1984

PAINTS AND VARNISHES

448

MS 133: PART B6:1999

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES: PART B6: DETERMINATION OF SOLUBLE ANTIMONY CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD AND RHODAMINE B SPECTROPHOTOMETRIC METHOD (ISO 3856/2:1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3856/2:1984

PAINTS AND VARNISHES

449

MS 133: PART B7:1999

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES: PART B7: DETERMINATION OF SOLUBLE BARIUM CONTENT - FLAME ATOMIC EMISSION SPECTROMETRIC METHOD (ISO 3856/3:1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3856/3:1984

PAINTS AND VARNISHES

450

MS 133: PART B8:1999

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES: PART B8: DETERMINATION OF SOLUBLE CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD AND POLAGRAPHIC METHOD (ISO 3856/4: 1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3856/4:1984

PAINTS AND VARNISHES

451

MS 133: PART B9:1999

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES: PART B9: DETERMINATION OF SOLUBLE HEXAVALENT CHROMIUM CONTENT OF THE PIGMENT PORTION OF THE LIQUID PAINT OR THE PAINT IN POWDER FORM - DIPHENYLCARBAZIDE SPECTROPHOTOMETRIC METHOD  (ISO 3856/5:1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3856/5:1984

PAINTS AND VARNISHES

452

MS 133: PART E14:2002

(CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E14 : DETERMINATION OF RESISTANCE TO ABRASION - ROTATING ABRASIVE-PAPER-COVERED WHEEL METHOD (ISO 7784-1:1997, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 7784-1:1997

PAINTS AND VARNISHES

453

MS ISO 15732:2011

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15732:2003

FINE CERAMICS

454

MS ISO 27447:2011

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS (ISO 27447:2009, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 27447:2009

FINE CERAMICS

455

MS 1398-1:2011

HOUSEHOLD INSECTIDE PRODUCTS - MOSQUITO VAPOURISING LIQUID - SPECIFICATION (SECOND REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

456

MS 651:2011

LIMESTONE FOR MAKING COLOURLESS GLASSES - SPECIFICATION (FIRST REVISION)

71.040.99

INDIGENOUS

 

LIME & LIME PRODUCTS

457

MS ISO 9308-1:2011

WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD (ISO 9308-1:2000, IDT)

07.100.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9308-1:2000

MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)

458

MS 133: PART A14:1996 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES AND THEIR RAW MATERIALS : PART A14 : TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING

87.040

INDIGENOUS

ISO 3270:1984

PAINTS AND VARNISHES

459

MS 133: PART C1:1996 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES PART C1: DETERMINATION OF WET EDGE TIME (FIRST REVISION)

87.040

INDIGENOUS

BS 3900: Part C1:1965

PAINTS AND VARNISHES

460

MS 133: PART D10:1999 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART D10: COLORIMETRY - COLOUR MEASUREMENT (ISO 7724/2:1984, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 7724/2:1984

PAINTS AND VARNISHES

461

MS 133: PART D11:1999 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART D11 : COLORIMETRY - CALCULATION OF COLOUR DIFFERENCES (ISO 7724/3 : 1984, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 7724/3 : 1984

PAINTS AND VARNISHES

462

MS 133: PART D 9:1999 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART D9: COLORIMETRY - PRINCIPLES

87.040

INDIGENOUS

ISO 7724/1:1984

PAINTS AND VARNISHES

463

MS 133: PART G6:1978 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS PART G6: RESISTANCE TO FUNGAL GROWTH

87.040

INDIGENOUS

 

PAINTS AND VARNISHES

464

MS 133 : PART D4 : 1998 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART D4 : COMPARISON OF CONTRAST RATIO (HIDING POWER) OF PAINTS OF THE SAME TYPE AND COLOUR (FIRST REVISION) [ISO 2814 : 1973, MOD]

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 2814 : 1973

PAINTS AND VARNISHES

465

MS 133 : PART D1 : 1998 (CONFIRMED:2011)

METHODS OF TEST FOR PAINTS AND VARNISHES : PART D1 : VISUAL COMPARISON OF THE COLOUR OF PAINTS (FIRST REVISION) (ISO 3668 : 1998, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3668 : 1998

PAINTS AND VARNISHES

466

MS 2405:2011

WATER QUALITY - DETERMINATION OF THE CHEMICAL OXYGEN DEMAND (ISO 6060:1989, MOD)

13.060.50

MODIFIED TO INTERNATIONAL STANDARD

ISO 6060:1989

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

467

MS ISO 8124 - 1 : 2011

Safety of Toys - Part 1 Safety aspects related to mechanical and physical properties (IDT, ISO 8124-1:2009)

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-1:2009

SAFETY OF TOYS

468

MS 1880-3:2011

SOIL QUALITY - VOCABULARY: PART 3: TERMS AND DEFINITIONS RELATING TO RISK MANAGEMENT

01.020

INDIGENOUS

ISO 11074:2005

SOIL QUALITY

469

MS ISO 11093-5:2012

PAPER AND BOARD - TESTING OF CORES - PART 5: DETERMINATION OF CHARACTERISTICS OF CONCENTRIC ROTATION (First revision) (ISO 11093-5:2009, COR. 1:2010, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-5:1994

PULP, PAPER AND BOARD

470

MS 1517:2012 

ORGANIC FERTILIZERS - SPECIFICATION (FIRST REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

471

MS ISO 10677:2012

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ULTRAVIOLET LIGHT SOURCE FOR TESTING SEMICONDUCTING PHOTOCATALYTIC MATERIALS (ISO 10677:2011, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 10677:2011

FINE CERAMICS

472

MS ISO 13124:2012

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR INTERFACIAL BOND STRENGTH OF CERAMIC MATERIALS (ISO 13124:2011, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 13124:2011

FINE CERAMICS

473

MS ISO 22197-2:2012

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 2: REMOVAL OF ACETALDEHYDE (ISO 22197-2:2011, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22197-2:2011

FINE CERAMICS

474

MS ISO 22197-3:2012

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 3: REMOVAL OF TOLUENE (ISO 22197-3:2011, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22197-3:2011

FINE CERAMICS

475

MS ISO 28703:2012

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL-SHOCK RESISTANCE OF POROUS CERAMICS (ISO 28703:2011, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 28703:2011

FINE CERAMICS

476

MS ISO 28704:2012

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CYCLIC BENDING FATIGUE OF POROUS CERAMICS AT ROOM TEMPERATURE (ISO 28704:2011, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 28704:2011

FINE CERAMICS

477

MS 880-9:2012 

METHODS OF TEST FOR PHOSPHORIC ACID - PART 9 : DETERMINATION OF IMPURITIES - LIMIT TEST

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

478

MS ISO 7263:2012 

CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING (FIRST REVISION) (ISO 7263:2011, IDT)

85.06

IDENTICAL TO INTERNATIONAL STANDARD

ISO 7263:2011

PULP, PAPER AND BOARD

479

MS 1044:2012

HOUSEHOLD INSECTICIDE PRODUCTS - MOSQUITO VAPOURISING MAT - SPECIFICATION (SECOND REVISION)

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

480

MS ISO/TS 10867:2012

NANOTECHNOLOGIES – CHARACTERIZATION OF SINGLE-WALL CARBON NANOTUBES USING NEAR INFRARED PHOTOLUMINESCENCE SPECTROSCOPY (ISO/TS 10867:2010, IDT)

07.030

IDENTICAL TO INTERNATIONAL STANDARD

ISO/TS 10867:2010

NANOTECHNOLOGIES

481

MS ISO/TS 11251:2012

NANOTECHNOLOGIES – CHARACTERIZATION OF VOLATILE COMPONENTS IN SINGLE-WALL CARBON NANOTUBE SAMPLES USING EVOLVED GAS ANALYSIS/GAS CHROMATOGRAPHY-MASS SPECTROMETRY (ISO/TS 11251:2010, IDT)

07.030

IDENTICAL TO INTERNATIONAL STANDARD

ISO/TS 11251:2010

NANOTECHNOLOGIES

482

MS 133-C2:2012

PAINTS AND VARNISHES - DRYING TESTS - PART C2: SURFACE-DRYING TEST USING BALLOTINI (SECOND REVISION) (ISO 9117-3:2010, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9117-3:2010

PAINTS AND VARNISHES

483

MS 133-C9:2012

PAINTS AND VARNISHES - DRYING TESTS - PART C9: PRESSURE TEST FOR STACKABILITY (ISO 9117-2:2010, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 9117-2:2010

PAINTS AND VARNISHES

484

MS 133-E10:2012 

PAINTS AND VARNISHES - PART E10: PULL-OFF TEST FOR ADHESION (FIRST REVISION) (ISO 4624:2002, MOD)

87.040

MODIFIED TO INTERNATIONAL STANDARD

ISO 4624:2002

PAINTS AND VARNISHES

485

MS 133-K1:2012 

BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K1: GENERAL METHODS OF TEST (ISO 6744-1:1999, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6744-1:1999

PAINTS AND VARNISHES

486

MS 133-K10:2012 

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART K10: VISUAL METHOD (ISO 4630-1:2004, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4630-1:2004

PAINTS AND VARNISHES

487

MS 133-K11:2012 

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART K11: SPECTROPHOTOMETRIC METHOD (ISO 4630-2:2004, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4630-2:2004

PAINTS AND VARNISHES

488

MS 133-K12:2012 

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART K12: VISUAL METHOD (ISO 6271-1:2004, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6271-1:2004

PAINTS AND VARNISHES

489

MS 133-K13:2012 

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART K13: SPECTROPHOTOMETRIC METHOD (ISO 6271-2:2004, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6271-2:2004

PAINTS AND VARNISHES

490

MS 133-K2:2012 

BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K2: DETERMINATION OF PHTHALIC ANHYDRIDE CONTENT (ISO 6744-2:1999, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6744-2:1999

PAINTS AND VARNISHES

491

MS 133-K3:2012 

BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K3: DETERMINATION OF UNSAPONIFIABLE MATTER CONTENT (ISO 6744-3:1999, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6744-3:1999

PAINTS AND VARNISHES

492

MS 133-K4:2012 

BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K4: DETERMINATION OF FATTY ACID CONTENT (ISO 6744-4:1999, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6744-4:1999

PAINTS AND VARNISHES

493

MS 133-K5:2012 

BINDERS FOR PAINTS AND VARNISHES - EPOXY RESINS - PART K5: GENERAL METHODS OF TEST (ISO 7142:2007, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 7142:2007

PAINTS AND VARNISHES

494

MS 133-K6:2012 

BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SAPONIFICATION VALUE - PART K6: TITRIMETRIC METHOD (ISO 3681:1996, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3681:1996

PAINTS AND VARNISHES

495

MS 133-K7:2012 

BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART K7: RING-AND-BALL METHOD (ISO 4625-1:2004, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4625-1:2004

PAINTS AND VARNISHES

496

MS 133-K8:2012 

BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART K8: CUP-AND-BALL METHOD (ISO 4625-2:2004, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4625-2:2004

PAINTS AND VARNISHES

497

MS 133-K9:2012 

BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - PART K9: TITRIMETRIC METHOD (ISO 4629:1996, IDT)

87.060.20

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4629:1996

PAINTS AND VARNISHES

498

MS 1288:2012 

PHOTOCOPY PAPER - SPECIFICATION (FIRST REVISION)

85.08

INDIGENOUS

-

PULP, PAPER AND BOARD

499

MS ISO 12192:2012 

PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD (FIRST REVISION) (ISO 12192:2011, IDT).

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 12192:2011

PULP, PAPER AND BOARD

500

MS ISO 15320:2012 

PULP, PAPER AND BOARD — DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT (ISO 15320:2011, IDT)

85.060, 85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15320:2011

PULP, PAPER AND BOARD

501

MS ISO 2493-1:2012 

PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION (SECOND REVISION) (ISO 2493-1:2010, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2493-1:2010

PULP, PAPER AND BOARD

502

MS ISO 3034:2012 

CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (FIRST REVISION) (ISO 3034:2011, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3034:2011

PULP, PAPER AND BOARD

503

MS ISO 776:2012 

PULPS — DETERMINATION OF ACID-INSOLUBLE ASH (FIRST REVISION) (ISO 776:2011, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 776:2011

PULP, PAPER AND BOARD

504

MS 1158:2012

CRAYONS - SPECIFICATION (FIRST REVISION)

97.200.50

INDIGENOUS

 

SAFETY OF TOYS

505

MS 1162:2012

CRAYONS - TEST METHODS (FIRST REVISION)

97.200.50

INDIGENOUS

 

SAFETY OF TOYS

506

MS ISO 8124-3:2012 

SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS (FIRST REVISION) (ISO 8124-3:2010, IDT)

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-3:2010

SAFETY OF TOYS

507

MS ISO 8124-4:2012

SAFETY OF TOYS - PART 4:SWINGS, SLIDES AND SIMILAR ACTIVITY TOYS FOR INDOOR AND OUTDOOR FAMILY DOMESTIC USE (ISO 8124-4:2010,IDT)

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-4:2010

SAFETY OF TOYS

508

MS 2457:2012 

SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF PH (WATER OR KCl) (FIRST REVISION)

13.080

INDIGENOUS

 

SOIL QUALITY

509

MS 2458:2012 

SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF SPECIFIC ELECTRICAL CONDUCTIVITY (FIRST REVISION)

13.080

INDIGENOUS

 

SOIL QUALITY

510

MS 2459:2012 

SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF ORGANIC CARBON CONTENT (WALKLEY AND BLACK COLOURIMETRIC METHOD) (FIRST REVISION)

13.080

INDIGENOUS

 

SOIL QUALITY

511

MS 2469:2012 

SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF ORGANIC MATTER CONTENT (WALKLEY AND BLACK TITRATION METHOD) (FIRST REVISION)

13.080

INDIGENOUS

 

SOIL QUALITY

512

MS ISO 5351:2012

PULPS- DETERMINATION OF LIMITIMG VISCOSITY NUMBER IN CUPRI-ETHYLENEDIAMINE(CED) SOLUTION (ISO 5351:2010, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

 

PULP, PAPER AND BOARD

513

MS 479:2012, ERR. 1:2013

THE SAFE HANDLING OF AGRICULTURAL PESTICIDES - CODE OF RECOMMENDED PRACTICE (FIRST REVISION)

65.1

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

514

MS 2532:2013

FORTIFIED ORGANIC FERTILIZERS - SPECIFICATION

65.080

INDIGENOUS

 

FERTILIZERS

515

MS 2546:2013

METHYL BROMIDE FUMIGATION - REQUIREMENTS

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

516

MS 171:2013

LIQUID CHLORINE USED FOR POTABLE WATER SUPPLY - SPECIFICATION (SECOND REVISION)

71.100.80

INDIGENOUS

 

WATER TREATMENT CHEMICALS

517

MS 2555:2014

LIQUID FERTILIZERS - SPECIFICATION

65.080

INDIGENOUS

 

FERTILIZERS

518

MS 54:2001 (CONFIRMED 2014)

SPEC. FOR MAGNESIUM SULPHATE, FERTILIZER GRADE (SECOND REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

519

MS ISO 14703:2009 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - SAMPLE PREPARATION FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS (FIRST REVISION)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 14703:2008

FINE CERAMICS

520

MS ISO 15165:2005 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CLASSIFICATION SYSTEM (ISO 15165:2001, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15165:2001

FINE CERAMICS

521

MS ISO 15490:2008 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE STRENGTH OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE

(FIRST REVISION) (ISO 15490:2008, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 15490:2008

FINE CERAMICS

522

MS ISO 18755:2006 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THERMAL DIFFUSIVITY OF MONOLITHIC CERAMICS BY LASER FLASH METHOD (ISO 18755:2005, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 18755:2005

FINE CERAMICS

523

MS ISO 20502:2009 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ADHESION OF CERAMIC COATINGS BY SCRATCH TESTING (FIRST REVISION) (ISO 20502:2005/Cor 1:2009, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20502:2005/Cor 1:2009

FINE CERAMICS

524

MS ISO 20504:2006 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 20504:2006

FINE CERAMICS

525

MS ISO 22214:2007 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CYCLIC BENDING FATIGUE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (ISO 22214:2006, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22214:2007

FINE CERAMICS

526

MS ISO 22215:2006 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE CREEP OF MONOLITHIC CERAMICS (ISO 22215:2006, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22215:2006

FINE CERAMICS

527

MS ISO 23145-1:2008 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 1: TAP DENSITY (ISO 23145-1:2007, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 23145-1:2007

FINE CERAMICS

528

MS ISO 24235:2008 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS BY LASER DIFFRACTION METHOD (ISO 24235:2007, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 24235:2007

FINE CERAMICS

529

MS ISO 26424:2009 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE ABRASION RESISTANCE OF COATINGS BY MICRO-SCALE ABRASION TEST (ISO 26424:2008, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 26424:2008

FINE CERAMICS

530

MS ISO 26443:2009 (CONFIRMED 2014)

FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008, IDT)

81.060.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 26443:2008

FINE CERAMICS

531

MS 1575:2003 (CONFIRMED 2014)

TEST METHODS FOR WATER IN ENGINE COOLANT CONCENTRATE BY KARL FISCHER REAGENT METHOD

71.080

INDIGENOUS

ASTM D1123-99

GENERAL PURPOSE CHEMICALS

532

MS 165:2014

INDUSTRIAL ACIDS - SAMPLING AND TEST METHODS (FIRST REVISION)

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

533

MS 1710:2003 (CONFIRMED 2014)

TEST METHOD FOR TRACE CHLORIDE ION IN ENGINE COOLANTS

71.080

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

534

MS 174:2014

FORMIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION)

71.080.40

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

535

MS 177:2014

HYDROCHLORIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION)

71.060.30

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

536

MS 1923:2006 (CONFIRMED 2014)

TEST METHOD FOR FOAMING TENDENCIES OF ENGINE COOLANTS IN GLASSWARE

71.080

INDIGENOUS

ASTM D 1881-97

GENERAL PURPOSE CHEMICALS

537

MS 1924:2006 (CONFIRMED 2014)

TEST METHOD FOR EFFECT OF COOLING SYSTEM CHEMICAL SOLUTIONS ON ORGANIC FINISHES FOR AUTOMOTIVE VEHICLES

71.080

INDIGENOUS

ASTM D 1287-91

GENERAL PURPOSE CHEMICALS

538

MS ISO 3696:2007 (CONFIRMED 2014)

WATER FOR ANALYTICAL LABORATORY USE - SPECIFICATION AND TEST METHODS (ISO 3696:1987, IDT)

13.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3696:1987

GENERAL PURPOSE CHEMICALS

539

MS ISO 6206:2003 (CONFIRMED 2014)

CHEMICAL PRODUCTS FOR INDUSTRIAL USE - SAMPLING - VOCABULARY (ISO 6206:1979, IDT)

71.040.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6206:1979

GENERAL PURPOSE CHEMICALS

540

MS ISO 6353-1:2003 (CONFIRMED 2014)

REAGENTS FOR CHEMICAL ANALYSIS - PART 1: GENERAL TEST METHODS (ISO 6353-1:1982, IDT)

71.040.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6353-1:1982

GENERAL PURPOSE CHEMICALS

541

MS ISO 6353-2:2003 (CONFIRMED 2014)

REAGENTS FOR CHEMICAL ANALYSIS - PART 2: SPECIFICATIONS - FIRST SERIES (ISO 6353-2:1983, ADD. 2:1986, IDT)

71.040.30

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6353-2:1983, ADD. 2:1986

GENERAL PURPOSE CHEMICALS

542

MS 2559:2014

LIMESTONE, QUICKLIME, HYDRATED LIME AND PUTTY LIME - METHODS FOR PHYSICAL TESTING

91.100.10

INDIGENOUS

 

LIME & LIME PRODUCTS

543

MS 1159:2009 (CONFIRMED 2014)

PENCIL - SPECIFICATION (FIRST REVISION)

35.260

INDIGENOUS

 

SAFETY OF TOYS

544

MS 1080:1987 (CONFIRMED 2014)

METHOD OF TEST FOR DETERMINATION OF TOTAL NON-IONIC DETERGENT BY BATCH TECHNIQUE

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

545

MS 1285:2014

GLASS CLEANER - SPECIFICATION (SECOND REVISION)

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

546

MS 1526:2014

FLOOR LIQUID DETERGENTS - SPECIFICATION (FIRST REVISION)

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

547

MS 553:2002 (CONFIRMED 2014)

SPECIFICATION FOR DETERGENT POWDER FOR HAND WASH HOUSEHOLD LAUNDRY (FIRST REVISION)

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

548

MS 791:2014

LIQUID DETERGENT FOR HOUSEHOLD HAND DISH WASHING - SPECIFICATION (SECOND REVISION)

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

549

MS ISO 1066:2006 (CONFIRMED 2014)

ANALYSIS OF SOAPS - DETERMINATION OF GLYCEROL CONTENT - TITRIMETRIC METHOD (ISO 1066:1975, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1066:1975

SOAPS AND DETERGENTS

550

MS ISO 2271:2003 (CONFIRMED 2014)

SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC-ACTIVE MATTER BY MANUAL OR MECHANICAL DIRECT TWOPHASE TITRATION PROCEDURE (FIRST REVISION) (ISO 2271:1989, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2271:1989

SOAPS AND DETERGENTS

551

MS ISO 456:2005 (CONFIRMED 2014)

SURFACE ACTIVE AGENTS - ANALYSIS OF SOAPS - DETERMINATION OF FREE CAUSTIC ALKALI (ISO 456:1973, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 456:1973

SOAPS AND DETERGENTS

552

MS ISO 607:2004 (CONFIRMED 2014)

SURFACE ACTIVE AGENTS AND DETERGENTS - METHOD OF SAMPLE DIVISION (ISO 607:1980, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 607:1980

SOAPS AND DETERGENTS

553

MS ISO 672:2006 (CONFIRMED 2014)

SOAPS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT - OVEN METHOD (ISO 672:1978, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 672:1978

SOAPS AND DETERGENTS

554

MS ISO 673:2004 (CONFIRMED 2014)

SOAPS - DETERMINATION OF CONTENT OF ETHANOL-INSOLUBLE MATTER (ISO 673:1981, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 673:1981

SOAPS AND DETERGENTS

555

MS ISO 685:2006 (CONFIRMED 2014)

ANALYSIS OF SOAPS - DETERMINATION OF TOTAL ALKALI CONTENT AND TOTAL FATTY MATTER CONTENT (ISO 685:1975, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 685:1975

SOAPS AND DETERGENTS

556

MS ISO 862:2005 (CONFIRMED 2014)

SURFACE ACTIVE AGENTS - VOCABULARY (ISO 862:1984 AND ITS TECHNICAL CORRIGENDUM 1:1993, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 862:1984 AND ITS TECHNICAL CORRIGENDUM 1:1993

SOAPS AND DETERGENTS

557

MS ISO 13878:2014

SOIL QUALITY - DETERMINATION OF TOTAL NITROGEN CONTENT BY DRY COMBUSTION ("ELEMENTAL ANALYSIS") (ISO 13878:1998, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 13878:1998

SOIL QUALITY

558

MS ISO 6107-3:2004 (CONFIRMED 2014)

WATER QUALITY - VOCABULARY - PART 3 (ISO 6107-3:1993 AND ITS AMENDMENT 1:2001,IDT)

01.040.13; 13.060.01

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-3:1993 AND ITS AMENDMENT 1:2001

WATER QUALITY

559

MS ISO 6107-4:2004 (CONFIRMED 2014)

WATER QUALITY - VOCABULARY - PART 4 (ISO 6107-4:1993, IDT)

01.040.13; 13.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-4:1993

WATER QUALITY

560

MS ISO 6107-8:2004 (CONFIRMED 2014)

WATER QUALITY - VOCABULARY - PART 8 (ISO 6107-8:1993 AND ITS AMENDMENT 1:2001,IDT)

01.040.13; 13.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 6107-8:1993 AND ITS AMENDMENT 1:2001

WATER QUALITY

561

MS ISO 6107-9:2004 (CONFIRMED 2014)

WATER QUALITY - VOCABULARY - PART 9:ALPHABETICAL LIST AND SUBJECT INDEX NOTE: TOTAL ADOPTION OF ISO 6107-9:1997

01.040.13; 13.060.01

IDENTICAL TO INTERNATIONAL STANDARD

 ISO 6107-9:1997

WATER QUALITY

562

MS ISO 1552:2003 (CONFIRMED 2014)

LIQUID CHLORINE FOR INDUSTRIAL USE ?? METHOD OF SAMPLING (FOR DETERMINING ONLY THE VOLUMETRIC CHLORINE CONTENT) (ISO 1552:1976, IDT)

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1552:1976

WATER TREATMENT CHEMICALS

563

MS ISO 2120:2003 (CONFIRMED 2014)

LIQUID CHLORINE FOR INDUSTRIAL USE - DETERMINATION OF THE CONTENT OF CHLORINE BY VOLUME IN THE VAPORIZED PRODUCT (ISO 2120:1972, IDT)

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2120:1972

WATER TREATMENT CHEMICALS

564

MS ISO 2121:2003 (CONFIRMED 2014)

LIQUID CHLORINE FOR INDUSTRIAL USE - DETERMINATION OF WATER CONTENT - GRAVIMETRIC METHOD (ISO 2121:1972, IDT)

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2121:1972

WATER TREATMENT CHEMICALS

565

MS ISO 2831:2003 (CONFIRMED 2014)

SODIUM FLUORIDE FOR INDUSTRIAL USE - DETERMINATION OF WATER-INSOLUBLE MATTER

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2831:1973

WATER TREATMENT CHEMICALS

566

MS ISO 2832:2003 (CONFIRMED 2014)

SODIUM FLUORIDE FOR INDUSTRIAL USE - DETERMINATION OF MOISTURE CONTENT

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2832:1973

WATER TREATMENT CHEMICALS

567

MS ISO 2833:2003 (CONFIRMED 2014)

SODIUM FLUORIDE FOR INDUSTRIAL USE - DETERMINATION OF FLUORINE CONTENT - MODIFIED WILLARD - WINTER METHOD

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2833:1973

WATER TREATMENT CHEMICALS

568

MS ISO 4281:2005 (CONFIRMED 2014)

SODIUM HEXAFLUOROSILICATE FOR INDUSTRIAL USE - DETERMINATION OF FREE ACIDITY AND TOTAL HEXAFLUOROSILICATE CONTENT - TITRIMETRIC METHOD

71.040.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4281:1977

WATER TREATMENT CHEMICALS

569

MS ISO 5444:2005 (CONFIRMED 2014)

SODIUM FLUOROSILICATE FOR INDUSTRIAL USE - DETERMINATION OF LOSS IN MASS AT 105oC

71.040.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5444:1978

WATER TREATMENT CHEMICALS

570

MS ISO 5993:2003 (CONFIRMED 2014)

SODIUM HYDROXIDE FOR INDUSTRIAL USE - DETERMINATION OF MERCURY CONTENT - FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5993:1979

WATER TREATMENT CHEMICALS

571

MS ISO 740:2003 (CONFIRMED 2014)

SODIUM CARBONATE FOR INDUSTRIAL USE - DETERMINATION OF TOTAL SOLUBLE ALKALINITY ? TITRIMETRIC METHOD

71.100.35

IDENTICAL TO INTERNATIONAL STANDARD

ISO 740:1976

WATER TREATMENT CHEMICALS

572

MS ISO 8391-1:2005 (CONFIRMED 2015)

CERAMIC COOKWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 1: METHOD OF TEST (ISO 8391-1:1986, IDT)

67.250, 81.040.30, 81.060.20, 97.040.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8391-1:1986

CLAY & CLAY PRODUCTS

573

MS ISO 8391-2:2005 (CONFIRMED 2015)

CERAMIC COOKWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 2: PERMISSIBLE LIMITS (ISO 8391-2:1986, IDT)

67.250, 81.040.30, 81.060.20, 97.040.60

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8391-2:1986

CLAY & CLAY PRODUCTS

574

MS 1983:2007 (CONFIRMED 2015)

TEST METHOD FOR SHEAR STRENGTH OF CONTINUOUS FIBER-REINFORCED ADVANCED CERAMICS AT AMBIENT TEMPERATURES

81.060.30

ADAPTATION OF INTERNATIONAL STANDARD

ASTM C 1292-00

FINE CERAMICS

575

MS 1984:2007 (CONFIRMED 2015)

LABORATORY COLONISATION OF INSECTS OF PUBLIC HEALTH IMPORTANCE - GUIDELINES

65.100.10, 71.100.99

INDIGENOUS

 

HOUSEHOLD PESTICIDES

576

MS 133: PART F6:2008 (CONFIRMED 2015)

PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - PART F6: EXPOSURE AND ASSESSMENT (FIRST REVISION) (ISO 2810:2004, IDT)

87.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2810:2004

PAINTS AND VARNISHES

577

MS ISO 11093-1:2007 (CONFIRMED 2015)

PAPER AND BOARD - TESTING OF CORES - PART 1: SAMPLING (ISO 11093-1:1994, IDT)

85.080

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-1:1994

PULP, PAPER AND BOARD

578

MS ISO 11093-2:2007 (CONFIRMED 2015)

PAPER AND BOARD - TESTING OF CORES - PART 2: CONDITIONING OF TEST SAMPLES (ISO 11093-2:1994, IDT)

85.080

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-2:1994

PULP, PAPER AND BOARD

579

MS ISO 11093-3:2008 (CONFIRMED 2015)

PAPER AND BOARD - TESTING OF CORES - PART 3: DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRYING METHOD (ISO 11093-3:1994, IDT)

85.080.00

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-3:1994

PULP, PAPER AND BOARD

580

MS ISO 11093-6:2008 (CONFIRMED 2015)

PAPER AND BOARD - TESTING OF CORES - PART 6: DETERMINATION OF BENDING STRENGTH BY THE THREE-POINT METHOD (ISO 11093-6:2005, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-6:2005

PULP, PAPER AND BOARD

581

MS ISO 11093-9:2007 (CONFIRMED 2015)

PAPER AND BOARD - TESTING OF CORES - PART 9: DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 11093-9:2006, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 11093-9:2006

PULP, PAPER AND BOARD

582

MS ISO 13542:2007 (CONFIRMED 2015)

PAPER AND BOARD - SPECIFICATION FOR INTERNAL DIAMETERS OF CORES FOR REELS (ISO 13542:2006, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 13542:2006

PULP, PAPER AND BOARD

583

MS ISO 17812:2008 (CONFIRMED 2015)

PAPER, BOARD AND PULPS - DETERMINATION OF TOTAL MAGNESIUM, TOTAL CALCIUM, TOTAL MANGANESE, TOTAL IRON AND TOTAL COPPER (ISO 17812:2007, IDT)

85.040, 85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 17812:2007

PULP, PAPER AND BOARD

584

MS ISO 1924-3:2008 (CONFIRMED 2015)

PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 3: CONSTANT RATE OF ELONGATION METHOD (100 mm/min) (ISO 1924-3:2005, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 1924-3:2005

PULP, PAPER AND BOARD

585

MS ISO 216:2008 (CONFIRMED 2015)

WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION (ISO 216:2007, IDT)

85.080.10

IDENTICAL TO INTERNATIONAL STANDARD

ISO 216:2007

PULP, PAPER AND BOARD

586

MS ISO 22754:2009 (CONFIRMED 2015)

PULP AND PAPER - DETERMINATION OF THE EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC NUMBER) BY INFRARED REFLECTANCE MEASUREMENT (ISO 22754:2008, IDT)

85.060, 85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 22754:2008

PULP, PAPER AND BOARD

587

MS ISO 2470-2:2009 (CONFIRMED 2015)

PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) (ISO 2470-2:2008, IDT)

85.060, 85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2470-2:2008

PULP, PAPER AND BOARD

588

MS ISO 3036:2009 (CONFIRMED 2015)

BOARD - DETERMINATION OF PUNCTURE RESISTANCE (ISO 3036:1975, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 3036:1975

PULP, PAPER AND BOARD

589

MS ISO 4119:2007 (CONFIRMED 2015)

PULPS - DETERMINATION OF STOCK CONCENTRATION (ISO 4119:1995, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4119:1995

PULP, PAPER AND BOARD

590

MS ISO 5267-1:2008, AMD.1:2010

(CONFIRMED 2015)

PULPS - DETERMINATION OF DRAINABILITY - PART 1: SCHOPPER-RIEGLER METHOD (ISO 5267-1:1999, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5267-1:1999

PULP, PAPER AND BOARD

591

MS ISO 5267-2:2007 (CONFIRMED 2015)

PULPS - DETERMINATION OF DRAINABILITY - PART 2: "CANADIAN STANDARD" FREENESS METHOD (ISO 5267-2:2001, IDT)

85.050

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5267-2:2001

PULP, PAPER AND BOARD

592

MS ISO 5269-1:2007 (CONFIRMED 2015)

PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 1: CONVENTIONAL SHEET-FORMER METHOD (ISO 5269-1:2005, IDT)

85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5269-1:2005

PULP, PAPER AND BOARD

593

MS ISO 638:2009 (CONFIRMED 2015)

PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD (FIRST REVISION) (ISO 638:2008, IDT)

85.060, 85.040

IDENTICAL TO INTERNATIONAL STANDARD

ISO 638:2008

PULP, PAPER AND BOARD

594

MS ISO 8254-1:2009 (CONFIRMED 2015)

PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD (ISO 8254-1:2009, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8254-1:2009

PULP, PAPER AND BOARD

595

MS ISO 8791-3:2007 (CONFIRMED 2015)

PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD (ISO 8791-3:2005, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8791-3:2005

PULP, PAPER AND BOARD

596

MS ISO 8791-4:2008 (CONFIRMED 2015)

PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 4: PRINT-SURF METHOD (ISO 8791-4:2007, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8791-4:2007

PULP, PAPER AND BOARD

597

MS ISO 9197:2007 (CONFIRMED 2015)

PAPER, BOARD AND PULPS - DETERMINATION OF WATER-SOLUBLE CHLORIDES (ISO 9197:2006, IDT)

85.060

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9197:2006

PULP, PAPER AND BOARD

598

MS 1519:2001 (CONFIRMED 2015)

METHODS OF TEST FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID (2,4-D)

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

599

MS 1717: PART 1:2003 (CONFIRMED 2015)

SPECIFICATION FOR DIURON PT. 1: DIURON TECHNICAL

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

600

MS 1717: PART 2:2003 (CONFIRMED 2015)

SPECIFICATION FOR DIURON : PT. 2: DIURON WETTABLE POWDER

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

601

MS 1717: PART 3:2003 (CONFIRMED 2015)

SPEC. FOR DIURON PT. 3: DIURON WATER - DISPERSIBLE GRANULES

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

602

MS 1717: PART 4:2003 (CONFIRMED 2015)

SPECIFICATION FOR DIURON: PART 4: SUSPENSION CONCENTRATE

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

603

MS 1993:2007 (CONFIRMED 2015)

WATER QUALITY - DETERMINATION OF IRON - SPECTROMETRIC METHOD USING 1,10-PHENANTHROLINE (ISO 6332:1988, MOD)

13.060.50

MODIFIED TO INTERNATIONAL STANDARD

ISO 6332:1988

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

604

MS 2263:2009 (CONFIRMED 2015)

WATER QUALITY- DETERMINATION OF AMMONIACAL NITROGEN -DISTILLATION AND TITRATION METHOD (ISO 5664:1984, MOD)

13.060.50

MODIFIED TO INTERNATIONAL STANDARD

ISO 5664:1984

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

605

MS ISO 7888:2005 (CONFIRMED 2015)

WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY (ISO 7888:1985, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 7888:1985

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

606

MS 1850: PART 9:2006 (CONFIRMED 2015)

WATER QUALITY - SAMPLING - PART 9: GUIDANCE ON SAMPLING FROM MARINE WATERS (ISO 5667 - PART 9:1992, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667 - PART 9:1992

SAMPLINGS (WATER QUALITY)

607

MS ISO 5667: PART 16:2007

(CONFIRMED 2015)

WATER QUALITY - SAMPLING - PART 16: GUIDANCE ON BIOTESTING OF SAMPLES (ISO 5667-16:1998, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667-16:1998

SAMPLINGS (WATER QUALITY)

608

MS 1887:2005 (CONFIRMED 2015)

TEST METHOD FOR PARTICLE SIZE OF SOAPS AND OTHER DETERGENTS

71.100.40

INDIGENOUS

ASTM D502-89

SOAPS AND DETERGENTS

609

MS ISO 4318:2007 (CONFIRMED 2015)

SURFACE ACTIVE AGENTS AND SOAPS - DETERMINATION OF WATER CONTENT - AZEOTROPIC DISTILLATION METHOD (ISO 4318:1989, IDT)

71.100.40

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4318:1989

SOAPS AND DETERGENTS

610

MS 185:2010 (CONFIRMED 2015)

AGRICULTURAL PESTICIDES - SAMPLING METHODS (FIRST REVISION)

65.100

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

611

MS 46:2016

SPECIFICATION FOR GROUND PHOSPHATE ROCK, AGRICULTURAL GRADE (THIRD REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

612

MS 2624:2016

SAFETY DATA SHEET - CONTENT AND ORDER OF SECTIONS

71.100.01

INDIGENOUS

 

GENERAL PURPOSE CHEMICALS

613

MS ISO 5814:2016

WATER QUALITY - DETERMINATION OF DISSOLVED OXYGEN - ELECTROCHEMICAL PROBE METHOD (ISO 5814:2012, IDT)

13.060.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5814:2012

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

614

MS ISO 8124-1:2016

SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (SECOND REVISION) (ISO 8124-1:2014, IDT)

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-1:2014

SAFETY OF TOYS

615

MS ISO 8124-2:2016

SAFETY OF TOYS - PART 2: FLAMMABILITY (SECOND REVISION)(ISO 8124-2:2014,IDT)

97.200.50

IDENTICAL TO INTERNATIONAL STANDARD

ISO 8124-2:2014

SAFETY OF TOYS

616

MS ISO/IEC GUIDE 50:2016

SAFETY ASPECTS - GUIDELINES FOR CHILD SAFETY IN STANDARDS AND OTHER SPECIFICATIONS (ISO/IEC GUIDE 50:2014, IDT)

01.120, 97.190

IDENTICAL TO INTERNATIONAL STANDARD

ISO/IEC GUIDE 50:2014

SAFETY OF TOYS

617

MS ISO 5667-1:2016

WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES (ISO 5667-1:2006, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667-1:2006

SAMPLINGS (WATER QUALITY)

618

 MS ISO 5667-3:2016

WATER QUALITY - SAMPLING - PART 3: GUIDANCE ON THE PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667 - PART 3:2012, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667 - PART 3:2012

SAMPLINGS (WATER QUALITY)

619

MS ISO 5667-20: 2016

WATER QUALITY - SAMPLING - PART 20: GUIDANCE ON THE USE OF DATA FOR DECISION MAKING - COMPLIANCE WITH TRESHOLDS AND CLASSIFICATION SYSTEMS (ISO 5667-20: 2008, IDT)

13.060.45

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667-20: 2008

SAMPLINGS (WATER QUALITY)

620

MS ISO 10694:2016

SOIL QUALITY - DETERMINATION OF ORGANIC AND TOTAL CARBON AFTER DRY COMBUSTION (ELEMENTARY ANALYSIS) (ISO 10694:1995, MOD)

13.080

MODIFIED TO INTERNATIONAL STANDARD

ISO 10694:1995

SOIL QUALITY

621

MS ISO 9698:2016

WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010, IDT)

31.060.60; 13.280

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9698:2010

WATER QUALITY

622

MS 1996:2016

TERMINOLOGY RELATING TO LIME AND LIME PRODUCTS  (AS USED BY THE INDUSTRY) (FIRST REVISION)

91.100.10

INDIGENOUS

 

LIME & LIME PRODUCTS

623

MS 1869:2017

WATER QUALITY - ENUMERATION OF CULTURABLE MICRO-ORGANISM - COLONY COUNT BY INOCULATION IN A NUTRIENT AGAR CULTURE MEDIUM (ISO 6222:1999, MOD) (FIRST REVISION)

 

MODIFIED TO INTERNATIONAL STANDARD

ISO 6222:1999

MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)

624

MS ISO 5667-19:2017

WATER QUALITY - SAMPLING - PART 19: GUIDANCE ON SAMPLING OF MARINE SEDIMENTS (ISO 5667-19:2004, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 5667-19:2004

SAMPLINGS (WATER QUALITY)

625

MS ISO 5667-8:2017

WATER QUALITY - SAMPLING - PART 8: GUIDANCE ON THE SAMPLING OF WET DEPOSITION (ISO 5667-8:1993)

 

MODIFIED TO INTERNATIONAL STANDARD

ISO 5667-8:1993

SAMPLINGS (WATER QUALITY)

626

MS ISO 5667-21:2017

WATER QUALITY - SAMPLING - PART 21: GUIDANCE ON SAMPLING OF DRINKING WATER DISTRIBUTED BY TANKERS OR MEANS OTHER THAN DISTRIBUTION PIPES (ISO 5667-21:2010)

 

MODIFIED TO INTERNATIONAL STANDARD

ISO 5667-21:2010

SAMPLINGS (WATER QUALITY)

627

MS ISO 2871-1:2017

SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF CATIONIC-ACTIVE MATTER CONTENT - PART 1: HIGH-MOLECULAR-MASS CATIONIC-ACTIVE MATTER (ISO 2871-1:1988, IDT) (FIRST REVISION)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2871-1:1988

SOAPS AND DETERGENTS

628

MS ISO 2871-2:2017

SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF CATIONIC-ACTIVE MATTER CONTENT - PART 2: CATIONIC-ACTIVE MATTER OF LOW MOLECULAR MASS (BETWEEN 200 AND 500) (ISO 2871-2:1990, IDT) (FIRST REVISION)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 2871-2:1990

SOAPS AND DETERGENTS

629

MS ISO 4317:2017

SURFACE ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (ISO 4317:2011, IDT) (FIRST REVISION)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 4317:2011

SOAPS AND DETERGENTS

630

MS ISO 9697:2017

WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE (FIRST REVISION) (ISO 9697:2015, IDT)

 

IDENTICAL TO INTERNATIONAL STANDARD

ISO 9697:2015

WATER QUALITY

631

MS 417-1:2017

THE ANALYSIS OF FERTILIZERS : PART 1 : METHOD OF SAMPLING AND SAMPLE PREPARATION (SECOND REVISION)

65.080

INDIGENOUS

 

FERTILIZERS

632

MS 23: 2017

HOUSEHOLD INSECTICIDE PRODUCTS - MOSQUITO COIL - CHEMICAL, PHYSICAL AND BIOLOGICAL EFFICACY REQUIREMENTS

(FIFTH REVISION)

65.100.01

INDIGENOUS

 

HOUSEHOLD PESTICIDES

633

MS 2627:2017

DETECTION OF PORCINE DNA - TEST METHOD - FOOD AND FOOD PRODUCTS

07.080 67.050

INDIGENOUS

 

PORCINE DNA

634

MS 849:2017

LIME AND LIME PRODUCTS - SAMPLING, SAMPLE PREPARATION, PACKAGING AND MARKING (SECOND REVISION)

91.100.10

INDIGENOUS

 

LIME & LIME PRODUCTS

635

MS 2628:2017

PAINT AND COATING SYSTEM FOR NAVAL VESSELS

25.220.10     87.020     87.040

INDIGENOUS

 

PAINTS AND VARNISHES

636

MS 2631:2017

MALATHION - SPECIFICATION AND TEST METHODS

65.100.10

INDIGENOUS

 

PESTICIDES AND AGROCHEMICALS

637

MS 701:2017

CLAY AND CLAY PRODUCTS - COMMERCIAL SAND - SPECIFICATIONS (FIRST REVISION)

81.040.10  81.060.10

INDIGENOUS

 

CLAY & CLAY PRODUCTS

638

MS ISO 15923-1:2017

WATER QUALITY - DETERMINATION OF SELECTED PARAMETER BY DISCRETE ANALYSIS SYSTEMS - PART 1: AMMONIUM,  NITRATE, NITRITE, CHLORIDE, ORTHOPHOSPHATE, SULFATE AND SILICATE WITH PHOTOMETRIC DETECTION (ISO 15923-1:2013, MOD)

13.060.50

MODIFIED TO INTERNATIONAL STANDARD

ISO 15923-1:2013

PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)

639

MS 2632:2017

LIME AND LIME PRODUCTS – ADDITIVES FOR PLASTERING MORTAR – SPECIFICATIONS

91.100.10

INDIGENOUS

 

LIME & LIME PRODUCTS

640

MS 2633:2018

HOUSEHOLD LAUNDRY DETERGENT POWDER - SPECIFICATION

71.100.40

INDIGENOUS

 

SOAPS AND DETERGENTS

641

MS ISO 9308-1:2018

WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL BACKGROUND FLORA (ISO 9308-1:2014, MOD) (FIRST REVISION)

 07.100.20

MODIFIED TO INTERNATIONAL STANDARD

ISO 9308-1:2014

MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)

back to top